基于SQP算法的末敏子弹体优化设计  

Optimization Design of Terminal Sensitive Bomb Based on SQP Algorithm

作　　者：刘慧玲 徐建军[1] 彭志凌[1] 赵河明[1] 郭永 丁明军 张海良 邢联大 LIU Huiling;XU Jianjun;PENG Zhiling;ZHAO Heming;GUO Yong;DING Mingjun;ZHANG Hailiang;XING Lianda(School of Mechanical and Electrical Engineering,North University of China,Taiyuan 030051,China;Huaihai Industrial Group Co.,Ltd.,Changzhi 046012,China;Military Representative Office of the PLA Air Force in Shanxi,Taiyuan 030024,China)

机构地区：[1]中北大学机电工程学院,太原030051 [2]淮海工业集团有限公司,山西长治046012 [3]中国人民解放军空军驻山西地区军事代表室,太原030024

出　　处：《兵器装备工程学报》2019年第5期85-87,共3页Journal of Ordnance Equipment Engineering

基　　金：山西省研究生联合培养基地人才培养项目

摘　　要：末敏子弹的稳态扫描阶段由离心转动惯量引起扫描角的波动将影响扫描质量。利用SQP算法解决约束优化问题的优点,求得某型末敏子弹体的转动惯量比为0. 973 25,在容许的条件范围之内,对末敏子弹的结构设计起到了很好的指导作用。The steady scanning phase of the terminal-sensitive bullet affects the scanning quality caused by the fluctuation of the scanning angle caused by the centrifugal moment of inertia.The SQP algorithm is one of the most effective ways to solve the constraint optimization problem.The moment of inertia ratio of the terminal-sensitive bullet obtained by SQP algorithm is 0.973 25,within the allowable condition range,which plays a good guiding role in the structural design of the terminal-sensitive bullet.

关 键 词：稳态扫描 扫描角 转动惯量比 SQP算法 非线性优化 

分 类 号：TJ410.3[兵器科学与技术—火炮、自动武器与弹药工程]