SPF规格材蠕变特性研究  

Study on Creep Properties of SPF Dimension Lumber

作　　者：徐伟涛 高中海 阙泽利 侯同宇 陈志渊 XU Wei-tao;GAO Zhong-hai;QUE Ze-li;HOU Tong-yu;CHEN Zhi-yuan(Planning & Design Institute of Forest Products Industry, National Forestry and Grassland Administration, Beijing 100010, China;Department of Wooden Structure Construction Engineering, Nanjing Forestry University, Nanjing 210037, China)

机构地区：[1]国家林业和草原局林产工业规划设计院,北京100010 [2]南京林业大学材料科学与工程学院木结构建筑系,南京210037

出　　处：《林产工业》2019年第6期37-40,共4页China Forest Products Industry

基　　金：全国林业科学成果国家级推广计划[2015]55号

摘　　要：以轻型木结构建筑常用的SPF规格材为研究对象,采用简支梁中部集中加载的方式进行短期弯曲蠕变试验。结果表明:在不同试验条件下蠕变经过瞬态蠕变阶段、相对稳定蠕变阶段。试件在不同持续负载水平下的蠕变应变-时间曲线具有几何相似性,其曲线的形状和走向趋势大致相同。蠕变变形量和曲线上的跳跃点随着应力水平的增加有增大的趋势。相比于侧弯受力,平弯蠕变速率更大,承载强度损耗较大。Taking the light wood frame construction commonly used SPF dimension lumber(pine)as the study object, authors of this paper carried out the short-term bending creep experiments. The creep test adopted the method of centralized loading in the middle of simply supported beam. The results showed that the creep deformation under different test conditions goes throuht transient creep stage and relatively stable creep stage. The creep strain-time curves of the specimens under different sustained loads are geometrically similar. The creep deformation and jump point on the curve tend to increase with the increase of stress level. Compared with side bending, the creep rate of flat bending is higher and the bearing strength loss is larger.

关 键 词：SPF规格材 蠕变特性 弯曲强度 

分 类 号：S781.21[农业科学—木材科学与技术]