检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:丁靖[1] 范士岡 陶文铨[1] DING Jing;FAN Shih-Kang;TAO Wen-Quan(Key Laboratory of Thermo-Fluid Science and Engineering of MOE, Xi'an Jiaotong University, Xi'an 710049, China;Department of Mechanical Engineering, Taiwan University, Taibei 10617, China)
机构地区:[1]西安交通大学热流科学与工程教育部重点实验室,西安710049 [2]台湾大学机械工程学系,台北10617
出 处:《工程热物理学报》2019年第6期1205-1210,共6页Journal of Engineering Thermophysics
基 金:海外及港澳学者合作研究基金(No.51728602);国家自然科学基金创新群体(No.51721004)
摘 要:能量收集是一种将环境中微小的能量转换成电能的技术,具有清洁环保的优点。本文主要研究了液滴型振动式能量收集器的输出特性和相关影响因素。本文首先制作了基于单颗液滴的振动式能量收集器,然后对其输出电压和输出功率进行了测量。实验结果表明,由于液体与固体的有效接触面积更大,液滴型振动式能量收集器的输出性能比无液滴的振动式能量收集器的性能更优。为了提高输出功率,本文进而制作了基于并联液滴的振动式能量收集器。实验发现,增加并联液滴的数量可以显著提升能量收集器的输出功率。随后,本文还对能量收集器的输出功率、液滴数量和负载电阻的相互影响进行了实验研究。最后,本文对实验测量数据进行了误差分析,证明了测量结果的可靠性。Energy harvesting is the conversion of ambient energy existing in the environment into electrical energy, which is regarded as a clean and environmental friendly technology. The output characteristics and the affecting factors of the droplet-based vibrational energy harvester were investigated in this research. A vibrational energy harvester based on a single droplet was fabricated and measured for its output voltage and output power. The experimental results showed shat the output performance of the droplet-based vibrational energy harvester is better than that of the vibrational energy harvester without a droplet, because the effective contact area between liquid and solid is larger than that between solid and solid. In order to improve the output power, a vibrational energy harvester based on droplet array was fabricated. It was experimentally confirmed that the output power of the energy harvester can be significantly improved by increasing the number of droplets. Besides, the effects of droplet number and load resistance on the output power of the energy harvester were experimentally studied. Finally, error analysis was conducted on the measurement data to verify the reliability of experimental results.
分 类 号:TK123[动力工程及工程热物理—工程热物理]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.28