检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:李雅洁 陈换过[1] 蔡丽[1] 张澎湃[2] 陈文华[1] 张关震[2] 任学冲 LI YaJie;CHEN HuanGuo;CAI Li;ZHANG PengPai;CHEN WenHua;ZHANG GuanZhen;REN XueChong(Zhejiang Sci-Tech University,Faculty of mechanical engineering & Automation,Hangzhou 310018,China;China Academy of Railway Sciences,Metal & Chemistry Research Institute,Beijing 100081,China;University of Science and Technology Beijing,National Center for Materials Service Safety,Beijing 100081,China)
机构地区:[1]浙江理工大学机械与自动控制学院,杭州310018 [2]中国铁道科学研究院金属及化学研究所,北京100081 [3]北京科技大学国家材料服役安全科学中心,北京10081
出 处:《机械强度》2019年第3期707-712,共6页Journal of Mechanical Strength
基 金:国家自然科学基金重点项目(U1234207);国家自然科学基金项目(51475432);浙江省国家自然科学基金(LZ13E050003)资助~~
摘 要:动车车轮轮辋疲劳裂纹常起裂于夹杂物聚集区,大尺寸的夹杂物聚集将会对其疲劳寿命产生影响。通过动力学仿真及有限元仿真结合材料疲劳试验确定了不同速度下含夹杂物车轮轮辋的概率疲劳寿命的方法。为了预估不同速度下含夹杂物动车车轮轮辋疲劳寿命,以CRH5型动车车轮为研究对象,建立了车辆动力学模型和含夹杂物的轮轴有限元模型,得到不同速度下车轮的随机载荷时间历程和危险部位的应力-时间历程,基于不同置信度和存活率下的S-N曲线和Miner准则对含夹杂物动车车轮轮辋进行疲劳寿命预估。结果表明:在相同的置信度和存活率下,随着速度的提高,含夹杂物车轮轮辋疲劳寿命会明显缩短;在相同的速度和置信度下,随着存活率的提高,含夹杂物车轮轮辋疲劳寿命会明显缩短;在相同的速度和存活率下,随着置信度的提高,含夹杂物车轮轮辋疲劳寿命会明显缩短。The fatigue crack of the wheel rims often explodes in the inclusions gathering area,and the accumulation of large inclusions will affect their fatigue life.In this article,through dynamic simulation and finite element simulation combined with material fatigue test to determine the probability of containing inclusions wheel rim method of fatigue life at different speeds.In order to estimate the fatigue life of the train wheel rim with inclusions at different speeds,the vehicle dynamics model and the wheel axle with inclusions finite element model of EMUs CRH5 were established.Then obtain the random load time history of the wheel and the stress time history of the dangerous parts at different speeds.Based on the different confidence degrees、survival rates of the S-N curve and the Miner criterion to establish fatigue life of the wheel rim containing inclusions.The results show that under the same confidence degree and survival rate,as speed increases,the fatigue life of wheel rim containing inclusions will obviously shorter;under the same speed and confidence degree,as survival rate increases,the fatigue life of wheel rim containing inclusions will obviously shorter;under the same speed and survival rate,as confidence degree increases,the fatigue life of wheel rim containing inclusions will obviously shorter.
分 类 号:TH114[机械工程—机械设计及理论]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.200