检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:马建国 滑宇飞 王圣棋 MA Jian-guo;HUA Yu-fei;WANG Sheng-qi(College of Civil Engineering,Inner Mongolia University of Technology,Hohhot 010051,China;Inner Mongolia Expressway Construction Co.,Ltd.Hohhot Branch, Surrounding City Expressway Maintenance Center,Hohhot 010000,China;Guizhou Hongxin Chuangda Engineering Testing Consulting Co.,Ltd.,Guiyang 550000,China)
机构地区:[1]内蒙古工业大学土木工程学院,内蒙古呼和浩特010051 [2]内蒙古高速建设有限责任公司呼和浩特分公司绕城高速养护所,内蒙古呼和浩特010000 [3]贵州宏信创达工程检测咨询有限公司,贵州贵阳550000
出 处:《内蒙古工业大学学报(自然科学版)》2019年第2期149-153,共5页Journal of Inner Mongolia University of Technology:Natural Science Edition
基 金:国家科技支撑项目(2015BAG19B02)
摘 要:依据内蒙古地区110国道(呼包段)路面结构建立ANSYS有限元分析模型,分析在不同重载作用下,路面结构层底拉应力、层底拉应变、路基顶面压应变和路表弯沉等力学特性,结果表明:随荷载的增加,各项力学指标均有所增加;荷载随着路面结构层深度的增加对结构层拉应力作用逐渐显著,在路面结构设计时,对于下面层及其以下结构层的材料应将抗拉性能作为一项重要设计指标.Based on the asphalt pavement structure of the National Highway No.110 (Hu-Bao section) in Inner Mongolia,the ANSYS finite element analysis model was established.The mechanical indexes such as bottom layer tensile stress,bottom layer tensile strain,subgrade top surface compressive strain and the deflection on the surface of the pavement structure were analyzed under different traffic loading grades.The results show that with the increase of traffic loads,all the mechanical indexes increase and with the increase of the depth of the pavement structure layer,the influence of the load on the tensile stress of the structural layer become evident gradually.Thus,in the design of the pavement structure,the tensile properties of materials of the bottom layer and the lower structure layer should be regarded as an important design index.
分 类 号:U297.91[交通运输工程—交通运输规划与管理]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.3