LNG装置润滑油空冷器扰流子设计实例  

Design example of spoiler for lubricating oil air cooler in an LNG plant

作　　者：崔雅萍 Cui Yaping(Kangtex (Shanghai) chemical engineering CO.,LTD. ,Shanghai pudong new area 201210)

机构地区：[1]康泰斯(上海)化学工程有限公司

出　　处：《云南化工》2019年第5期116-117,120,共3页Yunnan Chemical Technology

摘　　要：空冷器的控制热阻通常在空气侧,需采用翅片管增大表面积或湿式空冷强化管外传热。而案例中的润滑油空冷器则相反,控制热阻在管内。通过在管内设置扭带式扰流子,成功地进行了管内强化传热,并得到实践的检验。Normally air side is the main thermal resistance of air cooled heat exchanger,so it is necessary to enhance the air side heat transfer by using finned pipe to extend surface area or by wet cooling. On the contrary,in the case of the heavy lubricating oil air cooler,the main thermal resistance is inside the tube. The lubricating oil air cooler is designed by using twisted tape internals to strengthen the heat transfer in the tube. The expected cooling effect was achieved in practice.

关 键 词：空冷器 润滑油 管内强化传热 扰流子 

分 类 号：TH122[机械工程—机械设计及理论]