中厚度板轧机压下螺母承载特性研究  

Study on Bearing Characteristics of Pressed Nut in Plate Mill with Medium Thickness

在线阅读下载全文

作  者:丁钢 张海成 Ding Gang;Zhang Haicheng(Shandong Iron and Steel Joint Stock Co.,Ltd.,Laiwu Branch,Laiwu 271104;HBIS Tangsteel High Strength Automotive Strip Co.,Ltd.,Tangshan 063021)

机构地区:[1]山东钢铁股份有限公司莱芜分公司,山东莱芜271104 [2]河钢唐钢高强汽车板有限公司,河北唐山063021

出  处:《冶金设备》2019年第3期42-45,共4页Metallurgical Equipment

摘  要:中厚度板轧机的压下螺母是辊缝调节的关键结构,由于其工作速度快且动作频繁,在工作时两端受压,两端螺纹很容易因应力过大而损坏。利用有限元软件ANSYS对压下螺母进行了有限元仿真计算和承载特性分析。有限元仿真分析结果标明,压下螺母的承载特征是:载荷分布极不均匀,两端的螺牙承受载荷较大。压下螺母的改进措施是采用复合压下螺母,改进后的压下螺母的螺牙根部等效应力与螺牙面接触压力较普通压下螺母均大幅度减小。通过改变压下螺母的局部刚度达到了降低压下螺母两端螺牙根部应力峰值的目的。The medium thickness plate mill pressure nut is the key structure of the roll joint adjustment. Because of its fast working speed and frequent movements, and working under pressure at both ends, the two ends of the pressure nut are easily damaged by excessive stress. The finite element simulation calculation and load characteristic analysis of the pressure nut were carried out by using the finite element software ANSYS. The results of finite element simulation show that the bearing characteristics of the pressed nut are that the load distribution is very uneven and the screw teeth at both ends bear a large load. The improvement measure of the press-down nut is to use compound pressure nut. That the improved press nut screw root of equivalent stress and under the pressure of the screw tooth surface contact stress are greatly reduced than the ordinary nut. By changing the local stiffness of the nut under compression, the peak stress of the screw root at both ends of the nut can be reduced.

关 键 词:压下螺母 承载特性 等效应力 有限元分析 

分 类 号:TG333.7[金属学及工艺—金属压力加工]

 

参考文献:

正在载入数据...

 

二级参考文献:

正在载入数据...

 

耦合文献:

正在载入数据...

 

引证文献:

正在载入数据...

 

二级引证文献:

正在载入数据...

 

同被引文献:

正在载入数据...

 

相关期刊文献:

正在载入数据...

相关的主题
相关的作者对象
相关的机构对象