残膜回收机搂膜装置支撑梁仿真分析  

Simulation Analysis of Supporting Beams of Cuddle Film Device of Residual Film Recycling Machine

作　　者：康晓悦 赵岩[2,3] 田辛亮 颜利民 温浩军[2,3] 杨崇山 KANG Xiaoyue;ZHAO Yan;TIAN Xinliang;YAN Limin;WEN Haojun;YHANG Chongshan(College of Mechanical and Electrical Engineering, Qingdao Agricultural University,Qingdao 266109,China;College of Mechanical and Electrical Engineering, Shihezi Universit;Key Laboratory of Northwest Agricultural Equipment of Ministry of Agriculture)

机构地区：[1]青岛农业大学机电工程学院,山东青岛266109 [2]石河子大学机械电气工程学院 [3]农业部西北农业装备重点实验室

出　　处：《新疆农机化》2019年第3期41-42,46,共3页Xinjiang Agricultural Mechanization

基　　金：兵团应用基础研究计划(2016AG023);农业农村部农膜污染防控重点实验室开发基金(Klpcrpaf201801)

摘　　要：针对新疆棉田残膜回收率低的问题,本文研制了一种搂膜装置。其中支撑梁对弹齿及卸膜机构具有固定作用,支撑梁的稳定性对于机具能否正常作业起到关键作用。本文应用ANSYS软件对支撑梁施加载荷进行仿真分析,发现支撑梁等效应力云图和总位移云图均未超过最大值,满足设计要求。In order to solve the problem of low recovery rate of residual film in Xinjiang cotton field, a kind of cuddling membrane device was developed in this paper. Among them, the supporting beam plays a fixed role in the spring tooth and film unloading mechanism, and the stability of the supporting beam plays a key role in the normal operation of the machine. In this paper, ANSYS software is used to simulate and analyze the load of the support beam. It is found that the equivalent force cloud diagram and the total displacement cloud diagram of the support beam do not exceed the maximum value, which meets the design requirements.

关 键 词：支撑梁 残膜回收 仿真分析 

分 类 号：S223.5[农业科学—农业机械化工程]