检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:宋盼 徐秀兰 Song Pan;Xu Xiulan(CRSC (Changsha) Rail Transit Control Technology Co.,Ltd.,Changsha 410006,China)
机构地区:[1]通号(长沙)轨道交通控制技术有限公司,长沙410006
出 处:《铁路通信信号工程技术》2019年第7期89-92,共4页Railway Signalling & Communication Engineering
摘 要:京广线广坪段自闭改造工程中车站采用GMG-GX型电子化不对称高压脉冲轨道电路提高分路不良轨道区段分路灵敏度。在现场应用中,不对称高压脉冲轨道电路与97型25Hz相敏轨道电路相邻时,因两种不同制式电路时间特性不一致,出现轨道区段漏解锁、单机高速通过时占用丢失及短暂掉码的现象。通过分析不对称高压脉冲轨道电路和97型25Hz轨道电路时间特性,提出解决方案。GMG-GX electronic asymmetric high-voltage pulse track circuit is adopted in Guangping section of Beijing-Guangzhou Railway to improve the shunting sensitivity of poor track section.In fi eld application,when the asymmetric high-voltage pulse track circuit is adjacent to the 97 type 25 Hz phase-sensitive track circuit,due to the inconsistency of time characteristics of the two diff erent types of circuits,the phenomenon of missing release of the track section,loss of occupancy and short code missing occurs when the single train passes at high speed.In this paper,the solution is proposed by analyzing the time characteristics of asymmetric high-voltage pulse track circuit and 97 type 25 Hz track circuit.
关 键 词:高压脉冲轨道电路 25HZ轨道电路 漏解锁 列车占用丢失 掉码
分 类 号:U284.2[交通运输工程—交通信息工程及控制]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.192