纤维增强热塑复合材料高压容器制备工艺  

Preparation Technology of High-Pressure Vessel of FRTC

作　　者：袁松 翟建广[1] 张斌 周江龙 陈兵帅 李佳意 YUAN Song;ZHAI Jianguang;ZHANG Bin;ZHOU Jianglong;CHEN Bingshuai;LI Jiayi(School of Materials Engineering,Shanghai University of Engineering Science,Shanghai 201620,China)

机构地区：[1]上海工程技术大学材料工程学院

出　　处：《上海工程技术大学学报》2019年第2期102-105,共4页Journal of Shanghai University of Engineering Science

基　　金：上海工程技术大学大学生创新训练资助项目(E4-6000-16-0102)

摘　　要：采用玻璃纤维增强聚丙烯树脂缠绕铝合金6061内衬,缠绕方式为螺旋缠绕加环向缠绕,铺层方式为两层环向缠绕,两层54.4°螺旋缠绕,以此类推交替缠绕,封头采用测地线缠绕.对纤维增强热塑复合材料高压容器制备工艺进行研究和试验验证,最终得到高压容器.The glass fiber reinforced polypropylene was used to wind aluminum alloy 6061 liner.The winding pattern is spiral winding with hoop winding.The layering mode is two layers of hoop winding with two layers of 54.4°spiral winding alternately,the head uses geodesic winding.Then,the preparation technology of the high-press vessel of fiber reinforced thermoplastic composite(FRTC)was studied and testified by experiment,and the high-press vessel was produced.

关 键 词：高压容器 聚丙烯纤维 循环利用 

分 类 号：TP1[自动化与计算机技术—控制理论与控制工程] TP2[自动化与计算机技术—控制科学与工程]