基于管理数据的工业源排放清单校核研究——以沧州为例  

Research on the Verification of Industrial Source Emission Inventory Considering Environmental Management Data: Taking Cangzhou as an Example

作　　者：冉海潮[1] 雷团团 伯鑫 田飞 屈加豹 马岩 高爽 陈爱忠 赵晓宏 吕巍 张俊华 李时蓓 Kan Haichao;Lei Tuantuan;Bo Xin;Tian Fei;Qu Jiabao;Ma Yan;Gao Shuang;Chen Aizhong;Zhao Xiaohong;Lv Wei;Zhang Junhua;Li Shibei(School of Science and Technology of Environmental, HeBei University of Science and Technology, Shijiazhuang 050000, China;Appraisal Center for Environment and Engineering, Ministry of Environmental Protection, Beijing 100012, China;Shandong Academy of Enviromental Science Co. ,Ltd, Jinan 250013 ,China;Academy of Environmental Planning & Design,Co. , Ltd. , Nanjing University, Nanjing 210093, China;Cangzhou Ecology ang Environment Bureau, Cangzhou 061000, China)

机构地区：[1]河北科技大学环境科学与工程学院,河北石家庄050000 [2]生态环境部环境工程评估中心,北京100012 [3]山东省环境保护科学研究设计院有限公司,山东济南250013 [4]南京大学环境规划设计研究院股份公司,南京210093 [5]沧州市生态环境局,河北沧州061000

出　　处：《环境影响评价》2019年第4期46-49,54,共5页Environmental Impact Assessment

基　　金：国家重点研发计划项目(2016YFC0208101);大气重污染成因与治理攻关项目(DQGG0209-07、DQGG0304-07);河北省重点研发项目(18273705D);生态环境部区域大气环境管理与重污染天气应对财政专项(2110301)

摘　　要：基于排污许可、环评等环境管理数据,对沧州市2017年大气污染源排放清单中企业自主填报数据的准确性进行校核,通过填报数据对比筛选33家疑似问题企业进行实地调研,根据调研结果及污染源在线监测(简称CEMS)数据对清单排放浓度与排放量进行校核,做到清单建立的“事中控制”及“事后校核”。Based on the environmental management data such as Environmental Permitting and Environmental Impact Assessment, this paper verifies the accuracy of basic data reported by enterprises independently in the air pollution emission inventory of Cangzhou City in 2017. By comparing reported data and environmental management data, 33 enterprises with suspected problems were selected for field investigation, according to the result of investigation and the data of Continuous Emission Monitoring System (CEMS) to verify the concentration and emission inventory, which achieved the “Process Control” and “After Check” of the emission inventory. The results showed that there was a high level of deviation on the activity levels, the main deviation type is production output with deviation rate of 45. 5%;The emission changes of S02^PM10N PM2 5 were the most obvious before and after the verification, the differential emission values were 572.1 t/a,316. 6 t/a,399. 5t/a respectively, and the deviation rate is 53.1 %,49. 6%, 32.4% respectively. The method of the “ Process Control” and “ After Check” can be used to provide guidance on quality control during the data collection, and judge the accuracy of the emission inventory.

关 键 词：校核方法 排放清单 排污许可 EIA CEM 

分 类 号：X593[环境科学与工程—环境工程]