检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:颜建伟 林丹 YAN Jian-wei;LIN Dan(Key Laboratory of Product Packaging and Logistics of Guangdong Higher Education Institutes,Jinan University,Guangzhou 519070,China)
机构地区:[1]暨南大学产品包装与物流广东普通高校重点实验室
出 处:《包装工程》2019年第15期54-61,共8页Packaging Engineering
基 金:广东省自然科学基金(2017A030310183)
摘 要:目的以苹果为研究对象,建立一种易操作的脆值测定方案对苹果进行缓冲包装设计和分析。方法通过静态压缩试验测得苹果的线刚度,通过跌落试验测出破损临界跌落高度,进而基于单自由度理论模型计算出苹果脆值。根据苹果的脆值和缓冲材料的静态缓冲系数设计出最优包装方案。最后,模拟公路随机振动和跌落试验评价上述缓冲方案的可行性。结果无泡沫网苹果的破损临界跌落高度为5cm,线刚度为106.59kN/m,固有频率为109.79Hz;带泡沫网苹果破损临界跌落高度为10cm,线刚度为104.48kN/m,固有频率为106.58Hz,临界脆值Gc约为96.28。据此,按照80cm的搬运跌落高度设计时,缓冲材料EPE厚度需要达到1.98cm。结论建立的脆值测定方案具有精准度高,且较传统脆值测定方法对仪器依赖度低,具有操作简便易行、普适性强等优点,易于推广到其他类型包装件脆值的测定。The work aims to develop a fragility measurement scheme easy to operate for the cushioning packaging design and analysis of apples,with the apples as study object.The elastic stiffness of apples was determined by the static compression test.The critical drop height of damage was obtained by the drop test.Furthermore,the fragility of apples was calculated on the basis of single freedom theoretical model.Then,an optimal packaging scheme was designed according to the apple fragility and static cushioning coefficient of the cushioning materials.Finally,the road random vibration test and drop test were simulated to evaluate the feasibility of the above-mentioned cushioning scheme.For apples with mesh-foam protection,the critical drop height of damage was 5 cm,the elastic stiffness was 106.59 kN/m,and the natural frequency was 109.79 Hz,while those without mesh-foam protection were 10 cm,104.48 kN/m and 106.58 Hz,respectively,and the fragility Gc was about 96.In view of the above,as for the design according to the 80 cm handling drop height,the cushioning material EPE should be 1.98 cm thick.The fragility measurement scheme developed has high precision and it has such advantages as low demand on the instruments,good handle ability and generalization,compared with the traditional fragility measurement method.It is easy to apply the fragility measurement scheme in the fragility measurement of other types of packages.
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.13