基于爆堆矿岩比例测定其出矿品位的试验研究  

Experimental study on the mined ore grade based on the determination of the proportion of blasted-pile

作　　者：武拴军 朱强[2] 范永亮 张志贵[2] 陈星明[2] 钟敏[2] WU Shuanjun;ZHU Qiang;FAN Yongliang;ZHANG Zhigui;CHEN Xingming;ZHONG Min(Longshou Mine, Jinchuan Group Co.,Ltd.,Jinchang Gansu 737100,China;School of Environment and Resource,Southwest University of Science and Technology,Mianyang Sichuan 621010,China)

机构地区：[1]金川集团有限公司龙首矿,甘肃金昌737100 [2]西南科技大学环境与资源学院,四川绵阳621010

出　　处：《有色金属（矿山部分）》2019年第4期19-22,共4页NONFERROUS METALS(Mining Section）

摘　　要：出矿品位很大程度上影响矿石回收率及其选矿成本。现有出矿品位测定方法分析时间较长不能及时有效地指导矿山生产。结合甘肃某镍矿矿岩特性,提出利用人工CAD面积圈定法和ArcGIS测定法进行爆堆矿岩比例计算,对其出矿品位进行测定。为便于现场实际操作,进一步对ArcGIS测定法进行优化,直接利用矿岩面积比进行修正,计算出废石混入率,以指导矿山生产。The grade of mined ore greatly affects the ore recovery rate and its beneficiation costs.The current analysis method of the mined ore grade can’t guide the mine production in a timely and effective manner.Combined with the characteristics of a certain nickel ore in Gansu Province,the artificial CAD area circle method and ArcGIS method were proposed to calculate the proportion of ore to rock in blasting pile,and measures the mined ore grade.The ArcGIS measurement method was further optimized to facilitate the actual operation,and the area ratio was directly used for correction calculation of the waste in-ore rate so as to guide the mine production.

关 键 词：废石混入率 出矿品位 ArcGIS测定法 

分 类 号：TD853.36[矿业工程—金属矿开采] P208[矿业工程—矿山开采]