透明环氧树脂/椰纤维复合材料的制备与表征  

Fabrication and characterization of transparent epoxy resin/coconut fiber composites

作　　者：冯天时 秦建鲲 江宇 万希岑 龚宸 胡英成[1] FENG Tian-shi;QIN Jian-kun;JIANG Yu;WAN Xi-cen;GONG Chen;HU Ying-cheng(College of Material Science and Engineering, Northeast Forestry University,Harbin 150040, China)

机构地区：[1]东北林业大学材料科学与工程学院

出　　处：《热固性树脂》2019年第4期35-39,共5页Thermosetting Resin

基　　金：国家自然科学基金(31470581);中央高校基本科研业务费(2572016EBJ1);东北林业大学院级大学生创新训练项计划(CL201707)

摘　　要：在环氧树脂(ER)中添加质量分数分别为5%,10%,15%和20%的脱除木质素后的椰纤维(CF),制得复合材料。通过色差分析、吸水厚度膨胀率、吸水率、透过率、雾度以及力学性能测试研究了椰纤维添加量对于树脂及复合材料性能的影响。结果表明,随着CF用量的增加,树脂的白度下降,复合材料的膨胀率和吸水率升高,透过率降低。CF质量分数为5%时,材料的透过率最高,达到71%,雾度为60%,具有高透过率与高雾度并存的特点,此时冲击强度也较纯ER高。但ER/CF复合材料的拉伸强度较纯ER低。这表明脱木质素处理的CF与环氧树脂的界面结合仍较差。The composite was prepared by adding 5 wt%,10 wt%,15 wt%,and 20 wt% of the lignin-removed coconut fiber(CF)to the epoxy resin(ER),respectively. The effects of coconut fiber amount on the properties of resin and composite were investigated by the analysis of color difference and testings of water absorption thickness expansion rate,water absorption,transmittance,haze and mechanical properties. The results showed that with the increasing of CF amount,the whiteness of the resin was decreased. The expansion ratio and water absorption of the composite was increased and the transmittance was decreased. The material with 5 wt% of CF had the highest transmittance 71% and a haze of 60%. The material had the characteristics of coexistence of high transmittance and high haze. At this time,the impact strength was also higher than that of pure ER. However,the tensile strength of ER/CF composites was lower than that of pure ER. This indicated that the delignification-treated CF still had poor interface with the epoxy resin.

关 键 词：椰纤维 环氧树脂 透明复合材料 透过率 冲击强度 

分 类 号：TQ323.5[化学工程—合成树脂塑料工业]