三级重接炮的设计制作与研究  

Design manufacture and research of three-stage reconnect gun

作　　者：谭裕 江季鸿 夏雄平[1] Tan Yu;Jiang Jihong;Xia Xiongping(College of Science,Guilin University of Technology,Guilin Guangxi,541004)

机构地区：[1]桂林理工大学理学院

出　　处：《电子测试》2019年第16期7-8,49,共3页Electronic Test

基　　金：桂林理工大学大学生创新创业训练项目（201910596483）;桂林理工大学教改项目（2019B19）

摘　　要：本项目基于磁力线重接原理,采用在低压单次脉冲领域实现重接发射的新方法,利用Altuim Designer软件设计出各个功能模块的电路图,再按照光电控制电路方法制备出了三级重接炮。通过对该重接炮测试,得出重接炮具有结构简单、实用性强和性能稳定的特征。Based on the principle of reconnection of magnetic force lines,this project adopts a new method to realize reconnection and launch in the field of low-voltage single pulse.Altuim Designer software is used to design the circuit diagram of each function module,and the three-stage reconnection gun is prepared according to the photoelectric control circuit method.Through the test of reconnect gun,it is concluded that reconnect gun has the characteristics of simple structure,strong practicability and stable performance.

关 键 词：驱动线圈 磁通量密度 涡流密度 重接缝隙 

分 类 号：TJ866[兵器科学与技术—武器系统与运用工程]