检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:刘鹏 郭亚洲[1,2] 赵振强[1,2] 邢军 张超 LIU Peng;GUO Yazhou;ZHAO Zhenqiang;XING Jun;ZHANG Chao(School of Aeronautics, Northwestern Polytechnical University, Xi'an 710072 , China;Shaanxi Key Laboratory of Impact Dynamics and Its Engineering Applications, Northwestern Polytechnical University, Xi' an 710072, China;Airworthiness Certification Center, Civil Aviation Administration of China , Beijing 100102, China)
机构地区:[1]西北工业大学航空学院,西安710072 [2]西北工业大学陕西省冲击动力学及工程应用重点实验室,西安710072 [3]中国民用航空适航审定中心,北京100102
出 处:《航空学报》2019年第7期114-128,共15页Acta Aeronautica et Astronautica Sinica
基 金:国家自然科学基金(11772267)~~
摘 要:为研究典型二维三轴编织复合材料(2DTBC)的压缩破坏机理,建立了细观有限元模拟方法体系。提出了反映编织复合材料真实几何特性的单胞模型建模策略,根据Murakami-Ohno损伤理论建立了各向异性损伤模型来模拟纤维束中的损伤起始和扩展行为,通过引入波动系数描述了纤维束的起伏状态,并采用内聚力单元来模拟界面分层。在此基础上,分析得到了二维三轴编织复合材料在压缩载荷下的破坏过程,研究了压缩载荷下纤维束和界面层的损伤演化,探讨了纤维束波动对压缩性能的影响规律。通过与相关试验结果对比,该模型能够准确预测二维三轴编织复合材料在面内压缩载荷下的力学响应和主要失效行为,以及自由边效应。细观失效过程分析结果表明,二维三轴编织复合材料轴向压缩的破坏是由轴向纤维束的纤维压缩失效主导的;横向压缩破坏则是由偏轴纤维束的纤维压缩失效引起的。A meso-scale finite element model is developed to predict the progressive damage behavior of the two-Dimensional Triaxially Braided Composite(2DTBC)subjected to compressive loading conditions.A unit cell model that reflects the realistic geometrical properties of the braided composite is established.Based on Murakami-Ohno damage theory,an anisotropic damage model is established to simulate the damage initiation and the propagation process in fiber bundles.Undulation coefficient is introduced to describe the extent of undulation.The interfaces are simulated using the cohesive element model.The compressive damage process of 2DTBC is systematically illustrated and analyzed using the meso-scale finite element model,with special focus on the damage evolution process of fiber bundles and interfaces,and the effect of fiber bundle undulation on the effective compressive properties.The proposed model shows excellent correlation with the experimental results,not only capturing the global stress-strain responses,but also capturing the progressive damage behavior and the freeedge effect of the composite.The results indicate that the axial compression failure of the 2DTBC is dominated by the fibercompression failure of axial fiber bundles,and the transverse compression failure is caused by the fiber-compression failure of bias fiber bundles.
关 键 词:二维三轴编织复合材料 有限元方法 细观尺度 纤维束波动 压缩强度 渐进损伤行为
分 类 号:V258[一般工业技术—材料科学与工程]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.145