液力传动车辆闭锁充油动态缓冲特性优化  

Research on Dynamic Oil-filling Cushioning Properties of Locking Clutch in a Hydrodynamic Transmission Vehicle

作　　者：魏巍[1,2] 彭卉 刘旭 简洪超 谢文浩 闫清东 朱浩月[4] WEI Wei;PENG Hui;LIU Xu;JIAN Hongchao;XIE Wenhao;YAN Qingdong;ZHU Haoyue(National Key Laboratory of Vehicular Transmission, Beijing Institute of Technology, Beijing 100081, China;Collaborative Innovation Center of Electric Vehicles in Beijing, Beijing 100081,China;China Northern Vehicle Research Institute,Beijing 100072, China;Jiangsu Advanced Construction Machinery Innovation Center Co., LTD., Xuzhou 221004, Jiangsu, China)

机构地区：[1]北京理工大学车辆传动国家重点实验室,北京100081 [2]北京电动车辆协同创新中心,北京100081 [3]中国北方车辆研究所,北京100072 [4]江苏汇智高端工程机械创新中心有限公司,江苏徐州221004

出　　处：《兵工学报》2019年第7期1358-1364,共7页Acta Armamentarii

基　　金：国家自然科学基金项目(51475041);国家部委基础产品创新计划项目(237099000000170009);车辆传动国家重点实验室基金项目(614221304040517);北京理工大学国际科技合作专项项目(GZ2017035104);江苏省自然科学基金项目(BK20160223)

摘　　要：以某型液力传动车辆为研究对象,为提升液力工况向机械工况过渡过程中闭锁品质,尤其是减小车辆闭锁过程中产生的冲击,对闭锁离合器的动态缓冲特性开展理论和试验研究。建立具有闭锁功能的液力变矩器及其主、被动端动力学系统仿真模型,分析闭锁过程的快速充油、缓冲升压及阶跃升压各阶段对闭锁品质的影响,采用最优拉丁超立方试验设计方法,对缓冲升压阶段的缓冲斜率进行优化,通过所构造的闭锁品质评价函数比较优化前后冲击度、滑摩时间及滑摩功等品质评价参数,并搭建闭锁特性试验验证台架对优化前后闭锁品质进行验证。研究结果表明,所建立的动力学系统仿真模型能够对动态闭锁过程进行准确预测,优化后闭锁品质较优化前有明显改善,冲击度显著降低,基于闭锁品质评价函数的品质优化方法能够为液力传动车辆的闭锁特性的设计和研究提供理论参考。The dynamic cushioning properties of locking clutch for a hydrodynamic transmission vehicle are studied to improve the locking quality in the transition process from hydrodynamic transmission operating condition to mechanical condition, in particular, to reduce the impact in vehicle s locking process.The dynamic models for hydrodynamic torque converter with locking function and its input and output components are established. And the effects of oil-filling, buffer boosting, and step boosting on the locking quality during locking are analyzed. The optimal Latin hypercube design method is used to optimize the buffer slope in the buffer boost stage. The quality evaluation parameters, such as jerk, sliding time and sliding work, before and after optimization are compared using the proposed locking quality evaluation function. A locking characteristic test verification bench was built to verify the locking qualities before and after optimization. The results show that the proposed dynamic system simulation model can be used to accurately predict the dynamic locking process. The locking quality after optimization is significantly improved compared with the result before optimization, and the impact is significantly reduced.

关 键 词：液力传动 缓冲油压 优化设计 闭锁品质 

分 类 号：TJ810.322[兵器科学与技术—武器系统与运用工程]