金属橡胶阻感数学模型建立  

Establishment of Mathematical Model on Resistance-inductance for Metal Rubber

作　　者：杨凤彪 孙世宇 王宁[3] YANG Feng-biao;SUN Shi-yu;WANG Ning(Shijiazhuang Campus of Army Engineering University,Shijiazhuang 050003,China;Shandong Huayu University of Technology,Dezhou 253034,China;Chinese Academy of Weapons Science,Beijing 100081,China)

机构地区：[1]陆军工程大学石家庄校区,石家庄050003 [2]山东华宇工学院,山东德州253034 [3]中国兵器科学研究院,北京100081

出　　处：《火力与指挥控制》2019年第7期126-130,共5页Fire Control & Command Control

基　　金：国家自然科学基金(51275525);武器装备预先研究项目(51312060404);河北省军民结合产业发展专项资金资助项目

摘　　要：针对目前金属橡胶电流烧结时建立的电参数模型只考虑电阻效应,而忽略电感效应的不足,根据金属橡胶内部组织结构的特点,建立了空间电路拓扑结构模型;根据电容放电试验电流波形进行等效电阻、等效电感参数计算,对多次试验样本数据进行曲线拟合,得到了金属橡胶阻感参数随压力变化的数学回归方程。最后通过电容宽脉冲放电烧结试验验证了金属橡胶阻感数学模型的正确性。The electric parameter model based on the current sintering of metal rubber is only considered the resistance effect,and the inductance effect is ignored in current study.According to the characteristics of the internal structure of metal rubber,the topology model of the space circuit is established.The equivalent resistance value and equivalent inductance value are calculated according to the current waveform in capacitance discharge test.The curve fitting is performed for the data of multiple test samples,and the mathematical regression equation of the metal rubber's resistance一inductance parameters with the pressure change is obtained.Finally,the correctness of the mathematical model is verified through the experiment of capactive width pulse discharge sintering.

关 键 词：金属橡胶 数学模型 电感效应 烧结 

分 类 号：TM924.01[电气工程—电力电子与电力传动]