检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:周华荣 许永伟 张慧婷 翁存建 王鹏程 罗仙平 Zhou Huarong;Xu Yongwei;Zhang Huiting;Weng Cunjian;Wang Pengcheng;Luo Xianping(Technology Development of Western Mining Group Co.,Ltd.Xining 810006,China;Research Center of Nonferrous Mineral Resources of Engineering and Technology in Qinghai Province,Xining 810006,China;Qinghai Province Key Laboratory of Plateau Mineral Processing Engineering and Comprehensive Utilization,Xining 810006,China;School of Resources and Environmental Engineering,Jiangxi University of Science and Technology,Ganzhou 341000,China)
机构地区:[1]西部矿业集团科技发展有限公司,青海西宁810006 [2]青海省有色矿产资源工程技术研究中心,青海西宁810006 [3]青海省高原矿物加工工程与综合利用重点实验室,青海西宁810006 [4]江西理工大学资源与环境工程学院,江西赣州341000
出 处:《金属矿山》2019年第7期103-107,共5页Metal Mine
基 金:国家自然科学基金项目(编号:51374116);青海省重大科技专项(编号:2018-GX-A7)
摘 要:青海某铅锌硫化矿石选矿厂采用中性介质下优先浮铅-锌硫混浮-锌硫分离工艺流程处理矿石,导致生产不够稳定,选矿指标不理想。为解决此问题,采用中性介质下优先选铅-碱性介质下优先选锌-硫酸调浆再选硫的原则流程进行了选矿试验。结果表明:矿石在磨矿细度为-0.074 mm占55%的情况下,采用1粗2精1扫选铅、1粗2精1扫选锌、1次浮选选硫流程处理矿石,获得了铅品位为70.72%、含锌2.14%、含硫19.98%、含金1.92 g/t、含银1 322.45 g/t,铅回收率为91.78%、金回收率为14.28%、银回收率为76.29%的铅精矿;锌品位为48.86%、含铅0.26%、含硫32.67%,锌回收率为97.88%的锌精矿;硫品位为47.44%、含金0.67 g/t、含铅0.11%、含锌0.17%,硫回收率为64.14%、金回收率为80.86%的硫精矿。新工艺流程更简洁,生产更稳定顺畅,电耗和药剂成本均有所下降,在铅、锌精矿质量指标相当的情况下,铅、锌回收率分别提高了0.50和4.32个百分点,伴生金银和硫精矿指标也得到了改善。Preferential flotation of lead at neutral medium,mixed flotation of zinc-sulfur and separation of zinc-sulfur process were adopted to treat ores in a lead-zinc sulfide ores concentrator of Qinghai province,which caused unstable production and unsatisfactory index.In order to solve the problems,beneficial tests was carried out in the process of preferential flotation of lead at neutral medium,preferential flotation of zinc at alkaline medium and sulfur separation after pulp condition with sulfuric acid.The results indicated that in the case of grinding fineness of-0.074 mm accounting for 55%,lead was selected with one roughing-two cleaning-one scavenging,zinc was selected with one roughing-two cleaning-one scavenging and sulfur was selected with one flotation.The lead concentrate was obtained with lead grade of 70.72%,zinc grade of 2.14%,sulfur grade of 19.98%,gold grade of 1.92 g/t,silver grade of 1 322.45 g/t,lead recovery of 91.78%,gold recovery of 14.28%and silver recovery of 76.29%.The zinc concentrate was obtained with zinc grade of 48.86%,lead grade of 0.26%,sulfur grade of 32.67%and zinc recovery of 97.88%.The sulfur concentrate was obtained with sulfur grade of 47.44%,gold grade of0.67 g/t,lead grade of 0.11%,zinc grade of 0.17%,sulfur recovery of 64.14%and gold recovery of 80.86%.The new process is more concise,and the production is more stable and smooth.Also,power consumption and reagent costs are reduced.In the same grade index of lead and zinc,the recovery of lead and zinc were increased by 0.50 and 4.32 percentage points,respectively.In addition,the flotation index of associated gold and silver were improved.
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.117