基于反射法的推力室激光扫描测量技术研究  

Laser Scanning and Measurement of Thrust Chamber Based on Reflectance Method Technical Research

作　　者：王新永[1] 郭力振[2] 陈旭辉[1] 徐亮[1] 韩军[1] 宋楠 陈道勇[1] WANG Xin-yong;GUO Li-zhen;CHEN Xu-hui;XU Liang;HAN Jun;SONG Nan(Aerospace Research Institute of Materials & Processing Technology,Beijing 100076,China;Beijing Aerospace Institute for Metrology and Measurement Technology,Beijing 100076,China)

机构地区：[1]航天材料及工艺研究所,北京100076 [2]北京航天计量测试技术研究所,北京100076

出　　处：《宇航计测技术》2019年第4期13-15,5,共4页Journal of Astronautic Metrology and Measurement

基　　金：国家重大科学仪器设备开发专项(2013YQ310633)

摘　　要：针对推力室身部零件特殊的薄壁回转体结构,应用激光扫描测量方式进行非接触式测量,可避免常规接触式测量的接触力引起接触变形所产生测量误差。本文探索应用激光扫描测量,通过反射法对内腔及遮挡类结构进行单站测量,避免了传统扫描测量中因"移站"带来的坐标转化误差,研究分析了该工艺方法的原理,并通过实际零件测量验证,有效解决推力室身部零件内腔测量问题。反射法激光扫描测量方式可推广应用至其他类似大尺寸薄壁结构件的形位尺寸测量。According to the special thin-walled rotating body structure of the thrust chamber parts,the laser scanning measurement method is applied to the non-contact measurement to avoid the measurement error caused by the contact deformation caused by the contact force in the conventional contact measurement. The cavity structure or parts’ blocked can be measured by using reflection method. The inaccuracy that was generated in the coordinates exchanging can be avoided due to single station mode. In this paper,analyzes the process methods. And this method can be certificated though actual parts measurement experiments. The measurement problem of thrust chamber parts is solved effectively. Reflection laser scanning measurement method can be extended to other similar large-size thin-wall parts.

关 键 词：激光扫描测量 反射法 推力室 

分 类 号：TN249[电子电信—物理电子学]