氧化锌透明陶瓷光学透过模型构建与实验验证  

Optical Transmittance Model Construction for ZnO Transparent Ceramic and Experimental Verification

作　　者：林德宝[1] 范灵聪[1] 丁毛毛 谢建军[1] 雷芳[1] 施鹰[1] LIN De-Bao;FAN Ling-Cong;DING Mao-Mao;XIE Jian-Jun;LEI Fang;SHI Ying(Material Science and Engineering, Shanghai University, Shanghai 200444, China)

机构地区：[1]上海大学材料科学与工程学院

出　　处：《无机材料学报》2019年第8期851-856,共6页Journal of Inorganic Materials

基　　金：国家自然科学基金(51802186);上海高校青年教师培养资助计划(ZZSD18008)~~

摘　　要：本研究以ZnO透明陶瓷为研究对象,基于Mie理论及Rayleigh-Debye近似散射理论,建立了单轴六方晶系透明陶瓷的双折射散射与其直线光学透过率之间关联的理论模型,阐明了ZnO透明陶瓷光学直线透过率随晶粒尺寸减小、陶瓷织构度的提升而增大的关系。采用强磁场下的注浆成型工艺结合优化放电等离子体烧结参数,实现了ZnO透明陶瓷显微结构的有效调控,使得制备的ZnO透明陶瓷符合模型要求。实验结果表明:当ZnO陶瓷平均晶粒尺寸从1.72μm减小至0.66μm时,其600 nm处的直线透过率从5.1%提高到12.9%;对于亚微米级ZnO陶瓷(平均晶粒尺寸0.35μm),当陶瓷织构度从4.0%提高到24.7%时(XRD计算),样品光学直线透过率从21.6%提升到36.6%。所获得实验结果与构建的理论模型计算结果吻合,证实了所构建的模型。The influence of birefringent light scattering on in-line optical transmittance model depended on uniaxial hexagonal crystal structure transparent ceramics using Zn O as research object has been established based on Mie theory and its developed approximation Rayleigh-Gans-Debye scatting theory. Theoretical calculation indicates that in-line optical transmittance of ZnO transparent ceramics improves obviously with the decrease of grain size and increase of orientation. ZnO transparent ceramics which meet the microstructure requirements of the model were effectively controlled by slip casting process under a strong magnetic field and designing SPS sintering parameters. Corresponding results show that the in-line optical transmittance of non-textured ZnO transparent ceramic increased from 5.1% to 12.9% at 600 nm as grain size decreased from 1.72 μm to 0.35 μm while that of textured ZnO transparent ceramic(mean grain size 0.66 μm) was improved greatly from 21.6% to 36.6% at 600 nm due to increasing orientation factor to 24.7% calculated from XRD data. Based on these data, it is found that the calculation results of theoretical model match well with the experiment results.

关 键 词：ZNO 双折射 织构 透过率 

分 类 号：TB321[一般工业技术—材料科学与工程]