检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:黄小宁 王宁[1] 杜永峰[2] HUANG Xiao-ning;WANG Ning;DU Yong-feng(School of Civil Engineering, Qinghai University, Xining, Qinghai 810016, China;Institute of Earthquake Protection and Disaster Mitigation, Lanzhou University of Technology, Lanzhou 730050, China)
机构地区:[1]青海大学土木工程学院,西宁810016 [2]兰州理工大学防震减灾研究所,兰州730050
出 处:《工程力学》2019年第9期89-94,127,共7页Engineering Mechanics
基 金:青海省基础研究计划项目(2018-ZJ-953Q)
摘 要:在引入隔震支座地震损伤模型的基础上,运用整体可靠度理论对基础隔震框剪结构进行竖向连续倒塌可靠度分析。首先,利用隔震支座的地震损伤模型,得到罕遇地震作用下最易失效的隔震支座;然后,在考虑损伤结构不确定性参数的基础上,利用竖向随机动力增量分析(IDA)方法,得到损伤结构竖向连续倒塌荷载系数;以荷载系数为整体性能指标,进行易损性分析;利用基于最大熵原理的二次四阶矩法,计算损伤结构发生倒塌的概率,最后,以一基础隔震框剪结构为例,利用该方法计算损伤结构竖向连续倒塌的可靠度指标及失效概率。研究表明,该方法可直观地得到结构抗竖向连续倒塌的能力,为评估结构在地震作用下产生损伤提供量化依据。Based on the introduction of a seismic damage model of isolators, a reliability analysis of base-isolated frame-wall structures was conducted using the global reliability method. First, the most probable isolators to fail under strong motions were identified by the seismic damage model of isolators. Considering the basic random variables of damaged structures, progressive collapse load factors were then obtained using the random vertical incremental dynamic analysis method. As a global performance parameter, the load factor was adopted in the performance-based seismic fragility analysis. Probability and reliability indices of progressive collapse were determined using the second-order fourth-moment method. On the basis of this method, the probability and reliability indices of vertical progressive collapse were obtained. By using this method, the performance of progressive collapse resistance and structural seismic damage can be acquired.
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:13.58.73.22