检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:牛丽飞 曹运兴 石玢 张震 贾天让[1,2] NIU Lifei;CAO Yunxing;SHI Bin;ZHANG Zhen;JIA Tianrang(School of Safety Science and Engineering,Henan Polytechnic University,Jiaozuo Henan 454000,China;Institute of Gas Geology,Henan Polytechnic University,Jiaozuo Henan 454000,China;Coalbed Methane/Gas Geological Engineering Research Center,Henan Polytechnic University,Jiaozuo Henan 454000,China;Central Plains Economic Zone Seam/Shale Gas Collaborative Innovation Center,Jiaozuo Henan 454000,China;International Joint Laboratory of Unconventional Energy Geology and Development,Henan Province,Jiaozuo Henan 454000,China)
机构地区:[1]河南理工大学安全科学与工程学院,河南焦作454000 [2]河南理工大学瓦斯地质研究所,河南焦作454000 [3]河南理工大学煤层气/瓦斯地质工程研究中心,河南焦作454000 [4]中原经济区煤层/页岩气协同创新中心,河南焦作454000 [5]河南省非常规能源地质与开发国际联合实验室,河南焦作454000
出 处:《中国安全生产科学技术》2019年第9期82-87,共6页Journal of Safety Science and Technology
基 金:中国博士后科学基金项目(2017M622343);河南省博士后经费资助项目(001703047);河南理工大学博士基金项目(B2016-03)
摘 要:为了研究原位煤体渗透性的各向异性特征,以山西潞安常村矿3号煤层圆柱试样为对象,利用TCQT-Ⅲ型低渗煤层气相驱替增产试验装置,对煤样进行加载,并以氮气注入压力2.0MPa的条件下,分析垂直层理和平行层理2个方向的煤体变形和渗透率变化特征。实验结果表明:煤样在加载过程中,平行和垂直层理煤样渗透率均随着有效应力的增大而减小,平行层理方向的渗透率始终大于垂直层理方向,应力加载初期渗透率急剧下降,最后逐渐趋于平缓;径向应变的增加量与渗透率呈正相关性,且平行层理相关性大于垂直层理;沿平行层理方向的裂隙度大于沿垂直层理方向,沿垂直层理方向的应变量大于沿平行层理方向;应变增加量均随有效应力的增加而逐渐减小。研究结果可为煤层井网布置及优化提供参考。In order to study the anisotropic characteristics of in-situ coal permeability,taking the cylinder samples from No.3 coal seam of Changcun Mine in Lu’an Shanxi as the objects,the TCQT-Ⅲ test device of gas phase displacement for increasing production of low permeability coal seam was used for the loading of coal samples,and the change characteristics of coal deformation and permeability in the vertical bedding and parallel bedding directions were analyzed with the injection pressure of nitrogen as 2.0 MPa.The results showed that during the loading process of coal samples,both the permeability of coal samples with vertical bedding and parallel bedding decreased with the increase of effective stress,and the permeability in the parallel bedding direction was always larger than that in the vertical bedding direction.The permeability decreased sharply in the initial period of stress loading,and gradually tended to be flat at last.The increment of radial strain presented the positive correlation with the permeability,and the correlation of parallel bedding was larger than that of vertical bedding.The fracture degree along the parallel bedding direction was greater than that along the vertical bedding direction,and the strain along the vertical bedding direction was greater than that along the parallel bedding direction.Both the increment of strain decreased gradually with the increase of effective stress.The results can provide reference for the layout and optimization of coal seam well pattern.
分 类 号:X936[环境科学与工程—安全科学]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.28