高氯离子废水中低化学需氧量的简易快速检测  

Simple and rapid detection of low chemical oxygen demand in perchloride ion wastewater

作　　者：韩莉 郭林洁 HAN Li;GUO Lin-jie(North Branch of Qingdao Ecological Environment Bureau, Qingdao 266033, China;Kaifeng Weihui Water Co., Ltd., Kaifeng 475000, China)

机构地区：[1]青岛市生态环境局市北分局,青岛266033 [2]开封市玮晖水务有限公司,开封475000

出　　处：《青岛理工大学学报》2019年第5期96-100,共5页Journal of Qingdao University of Technology

摘　　要：在高氯离子工业废水中,由于氯离子干扰,化学需氧量采用国家标准方法检测需要时间较长,难以满足企业实际生产需要.采用氯离子含量估测、药剂量调整的微波消解方法,对韶关明天微波消解装置使用过程进行改良,进行了一系列试验对比,结果表明:本法具有准确度高、需要时间短(2h)、硫酸汞使用量小(降低37%)、适用更高浓度氯离子废水.本法可用于检测工业废水氯离子含量达20 000mg/L的化学需氧量.As to the wastewater in perchlorideion industry,because of the interference of chloride ion,it takes a long time to detect chemical oxygen demand with national standard method,which is difficult to meet the actual production needs of enterprises.In this paper,the microwave digestion method of chloride ion content estimation and dosage adjustment is used to improve the operation process of Shaoguan Tomorrow’s microwave digestion device.A series of experiments and comparisons were carried out.The results show that this method has advantages of high accuracy,short time demand(2 h),low consumption of mercury sulfate(37%),and is suitable for wastewater with higher concentration of chloride ion.This method can be used to detect chemical oxygen demand of industrial wastewater with chloride ion content up to 20 000 mg/L.

关 键 词：高氯离子 化学需氧量 测定方法 

分 类 号：X703[环境科学与工程—环境工程]