基于FPGA的光电成像与显示电路设计  

Design of Photoelectric Imaging and Display Circuit Based on FPGA

作　　者：赵红伟 刘凯丽[1,2] 张伟 陈建军[1,2] ZHAO Hongwei;LIU Kaili;ZHANG Wei;CHEN Jianjun(The 55th Research Institute of China Electronics Technology Group Corporation,Nanjing 210016,CHN;National Flat Panel Display Engineering Research Center,Nanjing 210016,CHN)

机构地区：[1]中国电子科技集团公司第五十五研究所,南京210016 [2]国家平板显示工程技术研究中心,南京210016

出　　处：《光电子技术》2019年第3期205-209,共5页Optoelectronic Technology

摘　　要：设计了一种以FPGA为核心处理器、CMOS图像传感器为图像输入、硅基OLED微显示器为图像输出的光电成像与显示电路。该电路由传感器板、图像处理板和接口板组成,实现了光电信号的转换、数字图像处理及最终的图像显示,具有体积小、重量轻、功耗低、扩展性强等优点,对便携式光电成像设备的设计具有一定的参考价值。A photoelectric imaging and display circuit was designed,with FPGA as the core processor,CMOS image sensor as the image input,and silicon-based OLED micro-display as the image output.The circuit consists of sensor board,image processing board and interface board,which could realize the digital data conversion from photoelectric signal,digital image processing and final image display.The circuit has the advantages of small size,light weight,low power consumption and strong expansibility,with certain reference value for the design of portable photoelectric imaging equipment.

关 键 词：互补金属氧化物半导体图像传感器 现场可编程门阵列 有机发光二极管 光电成像 

分 类 号：TN141[电子电信—物理电子学]