检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:赵传伟 裴学良[1,2] 马莉[1,2] 张辉[1,2] 兰恭涛[3] 朱长勇[3] ZHAO Chuanwei;PEI Xueliang;MA Li;ZHANG Hui;LAN Gongtao;ZHU Changyong(Drilling Technology Research Institute,Shengli Petroleum Engineering Co.,Ltd.,SINOPEC,Dongying 257000,China;Shengli Oilfield Company,SINOPEC,Dongying 257000,China;Yellow River Drilling Corporation,Shengli Petroleum Engineering Limited Corporation,SINOPEC,Dongying 257000,China)
机构地区:[1]中国石化胜利石油工程有限公司钻井工艺研究院,山东东营257000 [2]中国石化胜利油田分公司,山东东营257000 [3]中国石化胜利石油工程有限公司黄河钻井总公司,山东东营257000
出 处:《断块油气田》2019年第5期670-674,共5页Fault-Block Oil & Gas Field
基 金:国家科技重大专项“渤海湾盆地济阳坳陷致密油开发示范工程”(2017ZX05072);中石化胜利石油工程有限公司重点攻关项目“基于附壁效应的水力振动工具研制”
摘 要:针对现有水力振动工具存在工作压降大、耐腐蚀和耐高温性能差、寿命短、成本高等问题,根据附壁效应和旋流器的工作原理,设计了一种新型水力振动工具。该工具利用特殊流道和钻井液循环产生周期性振动,结构简单、无活动部件、工作压降小。文中利用流体动力学软件模拟研究了该工具的工作特性及影响因素,结果表明:随着入口流量的增大,进出口压降幅值、平均压降以及振动频率均逐渐增大;随着钻井液密度的增大,进出口压降幅值和平均压降逐渐增大。采用响应曲面法建立了进出口平均压降数学模型,室内实验验证了该数学模型的可靠性。工具适用排量为20~35 L/s,冲击力大于30 kN,振动频率大于10 Hz。现场试验表明,基于附壁效应的水力振动工具可减少钻井定向过程中的托压现象,提高钻井效率。The hydraulic vibration tool generally has such problems as large pressure drop, poor corrosion resistance and high temperature resistance, short life and high cost. In response to these problems, a new type of hydraulic vibration tool was designed based on the Coanda effect and the working principle of the cyclone. The tool can generate periodic vibration by using the special flow channels and drilling fluid circulation. It has the characteristics of simple structure, no moving parts and small pressure consumption. In this paper, the working characteristics of the tool and its influencing factors were studied by using computational fluid dynamics software. The results show that with the increase of inlet flow rate, the pressure drop amplitude, average pressure drop and vibration frequency increase gradually;with the increase of drilling mud density, the pressure drop amplitude and average pressure drop increase gradually. Response surface methodology was adopted to establish the mathematical model for the average pressure drop between the inlet and outlet. The laboratory experiments show that the model used predict the average pressure drop of the tool is effective, the applicable displacemeng for the tool is 20-35 L/s, the impact force generated by the tool is greater than 30 kN, and the vibration frequency is greater than 10 Hz. It provides theoretical guidance for the field application of the tool. The field tests show that the hydraulic vibration tool based on the Coanda effect can reduce the backing pressure on the orientation process and improve the drilling efficiency.
分 类 号:TE921[石油与天然气工程—石油机械设备]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.68