检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:陈弘毅[1,2,3] 史迅 陈立东[1,2] 仇鹏飞 CHEN Hong-Yi;SHI Xun;CHEN Li-Dong;QIU Peng-Fei(Shanghai Institute of Ceramics, Chinese Academy of Sciences, Shanghai 200050, Chin;Center of Materials Science and Optoelectronics Engineering, University of Chinese Academy of Sciences, Beijing 100049, China;ShanghaiTech University, Shanghai 201210, China)
机构地区:[1]中国科学院上海硅酸盐研究所,上海200050 [2]中国科学院大学材料科学与光电技术学院,北京100049 [3]上海科技大学,上海201210
出 处:《无机材料学报》2019年第10期1041-1046,共6页Journal of Inorganic Materials
基 金:国家自然科学基金重点项目(51625205);中国科学院科学出版基金(一等)择优支持~~
摘 要:材料发生相变时,其结构和物理性能可能会发生剧烈的变化。采用激光闪射法测量热扩散系数时,激光照射样品可能会伴随有光吸收/发射现象以及温度的显著升高,导致其测量值偏离真实值。本工作以Cu2S为研究对象,发现激光照射样品后,光吸收/发射的影响很小可以忽略,但样品温度的升高则会明显影响热扩散系数的测量。通过构建具有不同石墨层厚度的石墨/Cu2S双层结构,利用石墨层减弱激光照射时Cu2S样品的温度增加幅度,成功使热扩散系数出现显著降低的起始温度接近采用DSC测量材料发生相变的起始温度。本研究进一步建立了石墨/Cu2S双层结构样品的热流输运模型,从石墨/Cu2S双层结构样品的实验测试热扩散系数中解析出了Cu2S在相变区间的本征热扩散系数。本工作对于理解和精确表征具有相变特征的离子导体热电材料、光敏、热敏材料的热扩散系数具有重要的意义。Thermal diffusivity can be measured by the laser flash method. Previous study showed that Cu2S has extremely low thermal diffusivity during the first-order phase transition. However, when laser is applied on the measured sample, both the absorption/emission of light and the increase of temperature on the measured sample will occur. Their effects on the measurement accuracy of the thermal diffusivity during the phase transition have not been investigated yet. In this study, it is found that the absorption/emission of light has neglectable influence on the thermal diffusivity measurement of Cu2S. However, the increase of temperature can significantly influence the measurement results and shift the temperature when the thermal diffusivity of Cu2S starts to decrease below the starting temperature of the phase transition determined by DSC. This can be solved by building a Cu2S/graphite double-layer structure via using the graphite to absorb part of the laser’s energy. Furthermore, a thermal transport model is developed to extract the real thermal diffusivity from the measured thermal diffusivity of the Cu2S/graphite double-layer structure. This work is meaningful for accurate characterization and understanding of the thermal diffusivity of phase transition materials, photosensitive materials, and heat sensitive materials.
分 类 号:TB34[一般工业技术—材料科学与工程]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.127