一种基于光强变化的太阳电池参数提取方法  

A Parameter Extraction Method for Solar Cells Based on Variation of the Intensity of Illumination

作　　者：李瑞雪 徐小波[1] 谷文萍[1] LI Ruixue;XU Xiaobo;GU Wenping(School of Electronics and Control Engineering,Chang’an University,Xi’an 710064,China)

机构地区：[1]长安大学电子与控制工程学院

出　　处：《电子器件》2019年第4期856-860,共5页Chinese Journal of Electron Devices

基　　金：长安大学研究生科研创新实践项目(2018082)

摘　　要：通过考虑不同光强下电池开路和短路时候的J-V曲线,并对测量值开展参数提取。采用两种不同的拟合方法来提取串并联电阻、二极管理想因子n以及反向饱和电流密度J0,并利用拟合曲线与实验数据对比及理论与实验Voc的值对比分析,结果表明:所给出提取参数方法的可行性和正确性;以及方法1确定的二极管参数获得的理论值Voc与实验值具有大的偏差,而理论计算的性能参数使用方法2,其开路电压Voc与相应的实验性能参数能够很好地匹配。By considering the J-V curve of battery opening and shorting circuit under different light intensities,parameter extraction is carried out through linear fitting of measured values.Two different fitting methods are used to extract the series-parallel resistance,the diode ideal factor n and the reverse saturation current density J 0,by comparing the fitting curve with the experimental data and comparing the value of the theoretical and experimental V oc.It is shown that the method of extracting parameters is feasible and correct,and the theoretical value of V oc obtained from the approach 1 has not matched with the experimental value,and the theoretically calculated performance parameters using approach 2,open circuit voltage V oc matches well with the corresponding experimental performance parameters.

关 键 词：薄膜与光电 参数建模 钙钛矿太阳电池 J-V数据 线性拟合 

分 类 号：TM914.4[电气工程—电力电子与电力传动]