胶结层对透水混凝土性能影响研究  

Effect of cementation layer on the performance of pervious concrete

作　　者：杨江超 方从启[1,2] 董文燕 薛文韬 YANG Jiangchao;FANG Congqi;DONG Wenyan;XUE Wentao(School of Naval Architecture,Ocean and Civil Engineering,Shanghai Jiaotong University,Shanghai 200240,China;College of Civil Engineering,Shanghai Normal University,Shanghai 200234,China)

机构地区：[1]上海交通大学船舶海洋与建筑工程学院,上海200240 [2]上海师范大学建筑工程学院,上海200234

出　　处：《混凝土》2019年第7期11-14,共4页Concrete

基　　金：国家自然科学基金项目（51178264）;铁道部科技研究开发项目（J2001G003）;上海市科委重点专项项目（18070502900）

摘　　要：探究不同配合比参数对透水混凝土性能的影响,定量分析磷酸镁水泥用量变化对其性能的影响.研究结果表明:随着磷酸镁水泥用量的增多,透水混凝土的抗压强度、抗折强度明显上升.在水泥用量为500 kg/m3时,透水混凝土试块的强度均达到了最大值,抗压强度较水泥用量为350 kg/m3提高了11.50%,抗折强度较水泥用量为350 kg/m3提高了61.70%.因此,水泥用量增多后,对于透水混凝土而言胶结层变厚,透水混凝土强度随之升高。It explored the effect of different mix proportion parameters on the performance of pervious concrete and makes quantitative analysis to the effect of changes in the dosage of magnesium phosphate cement on its performance.The results show that with the increase of the amount of magnesium phosphate cement,the compressive strength and flexural strength of pervious concrete increase significantly.When the cement dosage is 500 kg/m3,the strength of the pervious concrete test block reaches the maximum value,and the compressive strength of the pervious concrete block increases by 11.50%compared with the cement dosage of 350 kg/m^3.The flexural strength is 61.70%higher than the cement dosage of 350 kg/m^3.Therefore,when the amount of cement is increased,the cementation layer becomes thicker for the pervious concrete,and the strength of the pervious concrete increases.

关 键 词：透水混凝土 胶结层 强度 透水性能 

分 类 号：TU528.01[建筑科学—建筑技术科学]