虚拟飞行半实物仿真控制系统中BMK板卡的研制  

Development of BMK board in Virtual Filght Semi-Physical simulation Control system

作　　者：马胡伟 周建江[1] Ma Huwei;Zhou Jianjiang(NanjingUniversity of Aeronautics and Astronautics,Nanjing Jiangsu,211100)

机构地区：[1]南京航空航天大学

出　　处：《电子测试》2019年第19期13-15,48,共4页Electronic Test

摘　　要：本文介绍了在虚拟飞行半实物仿真控制系统中BMK板卡的研制。首先介绍了板卡的硬件架构,包括PCI9054桥芯片与PXI总线端、Local总线端以及EEPROM配置芯片接口的设计以及相关寄存器的配置和初始化,同时对BMK板卡的自检电路实现作了简要说明;其次,阐述了使用64位WinDriver工具开发板卡驱动程序的基本流程和具体实现;最后,给出了板卡在调试和实测阶段的结果,验证了板卡设计的正确性,符合相关技术要求。The development of BMK board used in virtual flight semi-physical simulation control system is introduced in this paper.Firstly,the hardware architecture of the board is introduced,including the design of PCI9054 bridge chip and PXI bus terminal,Local bus terminal and EEPROM configuration chip interface,and the configuration and initialization of related registers.At the same time,a brief description of the implementation about self-test circuit of BMK board is made.Secondly,the basic flow and the concrete implementation of developing the board driver using 64-bit WinDriver is described.Finally,the results of the board in debugging and testing stages are given,which verifies the correction of the board design and meets the relevant technical requirements.

关 键 词：半实物仿真 BMK板卡 PCI9054 WINDRIVER 驱动程序开发 

分 类 号：TP3[自动化与计算机技术—计算机科学与技术]