基于CFD仿真模拟及PIV粒子示踪相结合法超滤膜组件优化  

Optimization of the ultrafiltration (UF) components based on combined method of CFD and PIV particle tracing method

作　　者：朱亮[1,2] 汪跃 陈琳 李玉坤[1,2] 张友思 吴新明 黄永福[3] 殷绪华 ZHU Liang;WANG Yue;CHEN Lin;LI Yukun;ZHANG Yousi;WU Xinming;HUANG Yongfu;YIN Xuhua(Key Laboratory of Integrated Regulation and Resources Development of Shallow Lakes,Hohai University,Nanjing 210098,China;College of Environment,Hohai University,Nanjing 210098,China;Shandong Membrane Source Water Purification Technology Co.,Ltd.,Zhangqiu 250200,China;Jiangsu Luoyun Water Project Management Department,Suqian 223800,China)

机构地区：[1]河海大学浅水湖泊综合治理与资源开发教育部重点实验室,江苏南京210098 [2]河海大学环境学院,江苏南京210098 [3]山东膜源水净化科技有限公司,山东章丘250200 [4]江苏省骆运水利工程管理处,江苏宿迁223800

出　　处：《河海大学学报（自然科学版）》2019年第5期402-410,共9页Journal of Hohai University(Natural Sciences)

摘　　要：采用在线监测与水力流体模拟相结合方式,利用数值模拟仿真技术、示踪技术及高速图像采集分析等手段,考察现有超滤膜组件内部的流场分布,并设计出新型超滤膜组件。结果表明,由于超滤膜组件内部流场主要受到布水管布水的影响,布水管上开孔均匀与否将直接影响整个超滤膜组件内部布水的均匀性。与组件UFA-860C相比,设计出的条形孔超滤膜组件因其布水管上有规则地均匀开孔且采用多根布水管组合,在运行时组件内部布水更加均匀,且能够充分利用膜丝的有效面积,从而有效减缓膜污染。Based on the combination of online monitoring and hydraulic fluid simulation,the distribution of flowing field inside the existing UF membrane component was investigated by means of numerical simulation,tracer technology and high-speed image acquisition and analysis,and new UF membrane components was designed.The results show that the internal flow field of UF membrane component is mainly affected by the cloth pipe,and the uniformity of opening of the water pipe directly affects the uniformity of water distribution inside the UF membrane component.Compared with the component of UFA-860C,the strip-hole UF membrane component has the ability to make better use of the effective area of UF membrane wire at the operating time,thus effectively reducing the membrane pollution.

关 键 词：超滤膜组件 CFD软件 数值模拟 高速图像 示踪粒子 粒子图像测速试验 流场分布 

分 类 号：X703.1[环境科学与工程—环境工程]