汽车同步环冷精锻工艺研究  

Research on Cold Precision Forging Process of Synchronous Ring for Vehicle

作　　者：陈昶 范彬 熊志宏 殷赳 CHEN Chang;FAN Bin;XIONG Zhi-hong;YIN Jiu(Engineering Training Center/College of Application and Innovation Entrepreneurship,Hunan City University,Yiyang 413000,China;School of Mechanical and Electrical Engineering,Hunan City University,Yiyang 413000,China)

机构地区：[1]湖南城市学院工程训练中心/应用与创新创业学院,湖南益阳413000 [2]湖南城市学院机械与电气工程学院,湖南益阳413000

出　　处：《机械工程与自动化》2019年第5期44-46,共3页Mechanical Engineering & Automation

基　　金：益阳市指导性科技计划项目(2017YZ15)

摘　　要：采用有限元模拟方法对G14型商用车同步环冷精锻工艺进行分析,研究了坯料定位方式、润滑条件和凸模下行速度对锻造工艺的影响。研究表明:相较于台阶外圆定位,齿根圆定位更适宜于锻件的成形;加强润滑条件和降低变形速度均不仅有利于降低载荷、节约能源、延长模具使用寿命,还可以提高锻件尺寸精度。The finite element simulation method was used to analyze the cold forging process of G14 commercial vehicle synchronous ring.The influence of blank positioning mode,lubrication condition and punch-pin down stroking speed on the forging process was studied.The research shows that the tooth root circle positioning is more suitable for the forming of forgings than the outer circle positioning of the step;strengthening the lubrication condition and reducing the deformation speed are not only beneficial to reduce the load,save energy,prolong the service life of the mold,but also improve the dimensional accuracy of the forging.

关 键 词：同步环 冷精锻 有限元法 汽车 

分 类 号：TP391.7[自动化与计算机技术—计算机应用技术] TG316[自动化与计算机技术—计算机科学与技术]