移动式车辆检查系统调试场地的辐射安全联锁系统设计  被引量:1

The Design of Radiational Safety Interlocking System for Test Site of Mobile Vehicle Inspection System

在线阅读下载全文

作  者:赵潇[1] 闫平 张国光[1] Zhao Xiao;Yan Ping;Zhang Guoguang(China Institute of Atomic Energy,Beijing 102413,China)

机构地区:[1]中国原子能科学研究院

出  处:《核安全》2019年第5期19-25,共7页Nuclear Safety

摘  要:中国原子能科学研究院开展的移动式高能低剂量车辆检查系统的研发项目,使用了电子感应加速器作为射线源。出束时,加速器可产生2~7.5 MeV能量的X射线,为Ⅱ类射线装置。因而,设备调试场地需要有安全连锁措施,以保证人员安全。本文针对高能低剂量车辆检查系统的调试场地的特点,设计一套以PLC(可编程逻辑控制器)作为主控单元,并包含门连锁、剂量连锁及巡更连锁的安全连锁系统,讲述了安全联锁系统的逻辑流程设计、场地硬件实现及使用顺序控制设计法进行PLC程序设计。China Institute of Atomic Energy is developing a mobile vehicle inspection system.The system has the advantages of high energy and low irradiation dose,which uses the electron induction accelerator as the source of the radiation.When a ray beam is emitted,the accelerator can produce X ray with 2~7.5 MeV ener gy,it is the ray device forⅡclass.Therefore,equipment commissioning site needs to have security chain mea sures to ensure personnel safety.Aiming at the characteristics of the commissioning site of high-energy and low-dose vehicle inspection system,this paper designs a set of safety interlocking system with PLC(program mable logic controller)as the main control unit and including door linkage,dose linkage and patrol linkage,de scribes the logic flow design of the safety interlocking system,the hardware implementation of the site and the PLC program design using the sequential control design method.

关 键 词:移动式车辆检查系统 安全联锁 PLC 顺序控制设计法 

分 类 号:TL7[核科学技术—辐射防护及环境保护]

 

参考文献:

正在载入数据...

 

二级参考文献:

正在载入数据...

 

耦合文献:

正在载入数据...

 

引证文献:

正在载入数据...

 

二级引证文献:

正在载入数据...

 

同被引文献:

正在载入数据...

 

相关期刊文献:

正在载入数据...

相关的主题
相关的作者对象
相关的机构对象