基于ZEMAX的反射式望远物镜设计  

Research on design of reflection-type telescope objective lens with ZEMAX

作　　者：张云哲[1] 冯厅 王郭玲 Zhang Yunzhe;Feng Ting;Wang Guoling(Xi’an University,Xi’an 710065,China)

机构地区：[1]西安文理学院

出　　处：《江苏科技信息》2019年第26期39-41,共3页Jiangsu Science and Technology Information

基　　金：陕西省教育厅专项科研计划项目;项目名称:基于光场调控的光子带隙多波混频理论与实验研究;项目编号:18JK1154;西安市科技计划项目;项目名称:基于铷原子参量放大涡旋光全光开关的研究;项目编号:2017CGWL07 2017CGWL18

摘　　要：文章应用ZEMAX光学软件,设计性能良好反射式望远物镜,总体可以分为两个阶段:第一个阶段是通过对已知参数的计算,确定出系统的尺寸大小。第二个阶段是把得到的参数输入ZEMAX中,利用ZEMAX仿真出系统的光路配置图,通过优化处理,得到R-C光学系统。分析模拟出的图形,证实了此次设计的R-C系统结构合理,成像质量高,并且满足参数要求。In this paper,ZEMAX optical software is used to design a reflective telescopic lens with good performance,which can be divided into two stages.The first stage is to determine the size of the system by calculating the known parameters.In the second stage,the obtained parameters are input into ZEMAX,and the optical configuration diagram of the system is simulated by ZEMAX,and the R-C optical system is obtained by optimizing processing.By analyzing the simulated figure,it is proved that the R-C system designed in this paper is reasonable in structure,high in imaging quality and meets the requirements of parameters.

关 键 词：光学设计 R-C系统 ZEMAX 

分 类 号：O439[机械工程—光学工程]