某弹丸45°攻角下侵彻装甲钢板的极限速度研究  

Research on Limit Velocity of the Projectile for Penetrating the Homogeneous Steel Plates Under the 45° Attack Angle

作　　者：刘晓蕾[1] 王鹏[1] 谭争光[1] 张岩[1] LIU Xiaolei;WANG Peng;TAN Zhengguang;ZHANG Yan(Northwest Institute of Mechanical and Electrical Engineering,Shaanxi Xianyang 712099,China)

机构地区：[1]西北机电工程研究所

出　　处：《弹箭与制导学报》2019年第3期1-4,共4页Journal of Projectiles,Rockets,Missiles and Guidance

摘　　要：文中使用数值模拟、理论分析与试验相结合的方法,分析某弹丸在45°攻角条件下对均质装甲钢板的弹道极限速度,以验证仿真模型的合理性及试验方法的有效性。首先通过仿真和理论公式预估45°攻角下侵彻均质装甲钢板的弹道极限速度;然后将所得结果与工程试验结果进行对比。通过对比分析可知,仿真和理论计算结果与工程试验结果一致性较好,可为今后相似研究提供有效数据支撑和理论依据。The article using the methods of combining numerical simulation,theoretical analysis with test to analyze the projectile’s ballistic limit velocity for homogeneous steel plates under the condition of the 45°attack angle,in order to validate the rationality of the simulation model and the availability of the experiment method.Firstly,through simulation and the theoretical formula estimated the ballistic limit velocity for penetrating the homogeneous steel plates under the 45°attack angle.Then,contrast the results with engineering test.By comparison and analysis,it can be found that there was good consistency between the simulation,theoretical arithmetic results and the engineering test results.The article provided the effective data support and theoretical basis for similar researching in the future.

关 键 词：侵彻 弹道极限速度 LS-DYNA 均质装甲钢板 

分 类 号：TJ410[兵器科学与技术—火炮、自动武器与弹药工程]