4种低密度聚乙烯树脂的链结构及其性能  

Chain Structure and Properties of Four Commercial Low Density Polyethylene Resins

作　　者：李沛 张嘉琪 刘巍 陈全[1] 唐毓婧[3] 姬相玲[1] 薛彦虎[1] 孙广平[2] LI Pei;ZHANG Jiaqi;LIU Wei;CHEN Quan;TANG Yujing;JI Xiangling;XUE Yanhu;SUN Guangping(State Key Laboratory of Polymer Physics and Chemistry,Changchun Institute of Applied Chemistry,Chinese Academy of Sciences,Changchun 130022,China;College of Materials Science and Engineering,Jilin University,Changchun 130022,China;Beijing Research Institute of Chemical Industry,SINOPEC,Beijing 100013,China)

机构地区：[1]中国科学院长春应用化学研究所,高分子物理与化学国家重点实验室,长春130022 [2]吉林大学材料科学与工程学院,长春130022 [3]中国石油化工股份有限公司北京化工研究院,北京100013

出　　处：《应用化学》2019年第11期1237-1247,共11页Chinese Journal of Applied Chemistry

基　　金：国家自然科学基金(20734006,50921062,21704100)资助~~

摘　　要：选用4种商品化的具有不同熔体流动速率的低密度聚乙烯(LDPE),利用高温凝胶渗透色谱仪(HT-GPC)、碳核磁共振谱仪(13C NMR)、差示扫描量热仪(DSC)和流变仪研究其链结构特点及其流变性能。按照相对分子质量的差异分成两组,D-1和Q-1,D-3和Y-1,每组的两个样品具有相近的平均相对分子质量。13C NMR的结果表明,4种LDPE都既含有短链支化又含有长链支化,且短链支化含量均高于长链支化含量;而短链支化中丁基含量最多。连续自成核退火热分级(SSA)结果表明,树脂中均含有不同长度的可结晶的亚甲基序列,即每种树脂分子链内的短链支化分布不均匀。探讨了相对分子质量及其分布、亚甲基序列长度及其分布、支化含量、结晶度等因素对树脂熔融行为、流变行为和薄膜力学性能的影响,发现Q-1的低相对分子质量尾端和Y-1的长链支化含量均影响熔体流动速率,平均亚甲基序列长度决定熔融峰的位置,结晶度直接影响薄膜的力学性能。基于上述结果,建立结构与性能的关联。Four commercial low density polyethylene(LDPE)resins with different melt flow rates were selected and their chain microstructures and the rheological properties were studied by high-temperature gel permeation chromatography(HT-GPC),13 carbon nuclear magnetic resonance spectroscopy(13C NMR),differential scanning calorimetry(DSC)and rheometer.The above resins are divided into two groups,D-1 and Q-1,D-3 and Y-1.Two resins in the same group have similar relative molecular mass.The results of 13 C NMR spectroscopy show that the four LDPE resins not only contain short chain branches(SCB),but also have long chain branches(LCB),and the content of SCB is much higher than that of LCB,while the butyl branch in SCB is the highest one.The thermal fractionation(successive self-nucleation/annealing,SSA)results show that every resin contains different crystallizable methylene sequence lengths,i.e.,the distribution of SCB in the intramolecular chain exhibits heterogeneity.The effects of molecular mass and its distribution,methylene sequence length and its distribution,branching content and crystallinity on melting behavior,rheological behavior and mechanical properties of the films were investigated.It is found that the low relative molecular mass end in Q-1 and LCB content in Y-1 influence their melt flow rate,the average methylene sequence length determines the melt temperature peaks,and the crystallinity influences the mechanical property of films.Based on the above results,the relationship between structure and property is established.

关 键 词：低密度聚乙烯 链结构 流变性能 力学性能 

分 类 号：O631[理学—高分子化学]