沥青基球形活性炭的制备与研究  

Preparation and study of pitch based spherical activated carbon

作　　者：莫宝庆 沈连仲 田昊 徐桂英[1] 周卫民 MO Baoqing;SHEN Lianzhong;TIAN Hao;XU Guiying;ZHOU Wei min(School of Chemical Engineering,University of Science and Technology Liaoning,Anshan 114051,China)

机构地区：[1]辽宁科技大学化学工程学院

出　　处：《辽宁科技大学学报》2019年第4期282-286,共5页Journal of University of Science and Technology Liaoning

基　　金：辽宁科技大学优秀人才项目（2017RC03）;辽宁科技大学煤化工创新团队建设项目（2016TD04）

摘　　要：采用煤焦油中温沥青(软化点为83℃)为主要原料,以悬浮法制备沥青球。采用SEM、BET来表征沥青球的表面形貌。探讨成球温度、搅拌速度、分散剂浓度等成球工艺条件对沥青基球形活性炭成球形貌的影响。结果表明,在成球温度为85℃,搅拌速度为300 r/min,分散剂质量浓度为15 g/L的条件下制备的沥青球球形度好,表面光滑。将制备的沥青球经过不熔化、炭化后成功制备了微孔占比为80%,比表面积为772 m2/g的沥青基球形活性炭。The coal pitch spheres were produced from the coal pitch with a softening point of 83℃by suspension method.The surface morphologies of the coal pitch spheres were characterized by SEM and BET.The effects of balling temperature,agitation speed,and PVA concentration on the sphere morphologies were investigated.The results show that the pitch spheres prepared at 85℃,300 r/min,and 15 g/L PVD concentration have good sphericity and smooth surface.The spherical activated carbon with a micropore ratio of 80%and a specific surface area of 772 m2/g was successfully prepared by non-melting and carbonization of the pitch spheres.

关 键 词：煤沥青 球形活性炭 球形度 粒径 

分 类 号：TQ424.1[化学工程]