后扭力横梁绞接件浮动压装设备的研制  

Development of the floating pressure-fitting equipment for the hinge of the rear torsion beam

作　　者：周飞 江捏棍 胡晓峰 ZHOU Fei;JIANG Niegun;HU Xiaofeng

机构地区：[1]湖北工业大学机械工程学院,湖北武汉430068 [2]湖北机电院装备制造有限责任公司,湖北武汉430000

出　　处：《现代机械》2019年第4期35-38,共4页Modern Machinery

摘　　要：针对企业在后扭力横梁的绞接件压装生产中,存在破损率较高的问题,研制了一套浮动压装设备。通过合理的机械结构设计,在差动压装系统的基础上,设计了浮动系统,解决了后扭力横梁散差大,与绞接件不同轴心的问题。生产实践证明,在设备投产后,绞接件破损率大大降低,减少了工件的返工,提升生产效率。该设备的研制,对汽车制造企业的后扭力横梁压装生产设备的设计具有一定的指导意义。In order to solve the problem of high breakage rate in the press-fitting production of hinge joint of rear torsion beam,a set of floating press-fitting equipment was developed.Through the reasonable mechanical structure design,on the basis of the differential press-fitting system,the floating system is designed,which solves the problem of the large dispersion of the torsion beam and the different axis with the hinge joint.Production practice has proved that after the equipment is put into production,the breakage rate of the hinge joint is greatly reduced,the production efficiency is improved.The development of the modified equipment has certain guiding significance for the design of the rear torsion beam press-fitting equipment in automobile manufacturing enterprises.

关 键 词：后扭力横梁 绞接件 浮动系统 压装 

分 类 号：TP69[自动化与计算机技术—控制理论与控制工程]