某大型工程高大模板支撑系统安全控制的研究  

Study on Safety Control of Supporting System of High and Large Formwork in a Large Project

作　　者：马洪伟[1,2] 郑浩 王梓鉴 王宏军 范世宏 徐永海[2] MA Hong-wei;ZHENG Hao;WANG Zi-jian;WANGHong-jun;FAN Shi-hong;XU Yong-hai(College of Civil Science and Engineering,Yangzhou University,Yangzhou Jiangsu 225127 China;Jiangsu Hanjian Group Limited,Yangzhou Jiangsu 225127 China;Yangzhou Construction Safety Supervision Station,Yangzhou Jiangsu 225009 China)

机构地区：[1]扬州大学建筑科学与工程学院,江苏扬州225127 [2]江苏邗建集团有限公司,江苏扬州225127 [3]扬州市建筑安全监察站,江苏扬州225009

出　　处：《江苏建筑》2019年第5期69-72,共4页Jiangsu Construction

基　　金：住建部项目计划(高支模体系安全监测预警分析与应用系统研究2014-K2-022);江苏省“双创博士”人才计划

摘　　要：高支模体系在建筑工程中运用广泛,由于其施工难度较大,影响因素较多,国家相关技术规范和规程尚不完善,因而其安全隐患难以得到有效控制,极易造成重大人员伤亡事故。文章主要概述高支模体系理论计算的要点,对其施工工艺流程中的支撑搭设、拆除、成品保护和系统安全监测控制进行探讨。High formwork support system is widely used in construction projects. Because of its great difficulty in construction, many influencing factors and imperfect national relevant technical specifications and regulations, it is difficult to effectively control its potential safety hazards, which can easily cause serious casualties. This paper mainly outlines the main points of theoretical calculation of high formwork support system, and discusses the support erection, demolition, finished product protection and system safety monitoring and control in its construction process.

关 键 词：高支模 安全 控制 

分 类 号：TU755.2[建筑科学—建筑技术科学]