数控系统手轮回退功能的研究与实现  

Research on MPG Retracement Function of Numerical Control System and its Realization

作　　者：宋嘎[1] 樊晨飞 叶佩青 SONG Ga;FAN Chen-fei;YE Pei-qing(YE Peiqing Expert Studio,Shandong Polytechnic,Jinan 250104,China;Department of Mechanical Engineering,Tsinghua University,Beijing 100084,China)

机构地区：[1]山东职业学院叶佩青专家工作室,济南250104 [2]清华大学机械工程系,北京100084

出　　处：《组合机床与自动化加工技术》2019年第11期70-73,共4页Modular Machine Tool & Automatic Manufacturing Technique

基　　金：国家数控重大专项(2017ZX04010001-009);山东省高等学校科研发展计划项目(J17KB036)

摘　　要：针对数控系统中采用手轮完成已加工轨迹回退的功能需求,基于某国产数控系统,设计开发了可双向检索的数据链表,存储刀具轨迹数据,实现了在任意位置反转手轮时数控系统沿已加工轨迹回退的功能。同时针对手轮回退过程中涉及的速度控制、方向控制进行了研究,采用“分时采集、延后输出”的方法保证了手轮输入不确定的情况下输出脉冲速度的连续。最后,在软件仿真环境和硬件开发平台上验证了该方案的有效性。In view of the functional requirements of the numerical control system using MPG to complete the retracement of machined track,based on a domestic numerical control system,a data link table using for storing the tool path data is designed and developed,and the data link table can be retrieved in both directions.On this basis,the function of numerical control system retracing along the machined track is realized when the MPG is reversed at any position.At the same time,the velocity control and direction control are studied in the process of MPG retracement.The method of"time-sharing acquisition and delayed output"is adopted to ensure the continuity of output pulse speed under the condition of uncertain input of MPG.Finally,the validity of the scheme is verified on the software simulation environment and the hardware development platform.

关 键 词：数控系统 加工轨迹 手轮回退 

分 类 号：TH165[机械工程—机械制造及自动化] TG659[金属学及工艺—金属切削加工及机床]