检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:宋海声[1] 刘聪 赵强[2,3] 强成文 李龙[2,3] 王飞 张艳斌[2,3] 张雪荧 SONG Haisheng;LIU Cong;ZHAO Qiang;QIANG Chengwen;LI Long;WANG Fei;ZHANG Yanbin;ZHANG Xueying(College of Physics and Electronic Engineering,Northwest Normal University,Lanzhou 730000,China;Institute of Modern Physics,Chinese Academy of Sciences,Lanzhou 730000,China;School of Nuclear Science and Technology,University of Chinese Academy of Sciences,Beijing 100049,China)
机构地区:[1]西北师范大学物理与电子工程学院,兰州730000 [2]中国科学院近代物理研究所,兰州730000 [3]中国科学院大学核科学与技术学院,北京100049
出 处:《原子核物理评论》2019年第3期388-393,共6页Nuclear Physics Review
基 金:国家自然科学基金资助项目(11664036,11605258);中国科学院战略性先导科技专项资助项目(XDA21010202)~~
摘 要:颗粒传热实验测控系统是为颗粒换热平台设计的测控系统。该系统基于分布式系统EPICS架构设计,通过对NI硬件平台、红外热像仪设备以及Oracle数据库进行集成,实现了颗粒换热平台实验的在线采集、监测、控制与实时存储。由于红外热像仪具有灵敏度高、测温范围广、非接触测温等优点,因此在该测控系统中用于测量颗粒在换热器出口处的温度。本文使用SDK将其集成到EPICS系统中,利用红外图像更加直观地呈现出颗粒的实时温度分布,并提取红外图像中的数据,与热电偶的测量数据对比,进一步检测利用红外热像仪作为一种颗粒实时温度测量设备的可行性。实验结果表明,集成后的红外热像仪操作软件能够实时提取并存储红外图像中的温度数值,并且采用EPICS架构设计、开发的颗粒传热实验测控系统完全可以满足颗粒换热平台的数据采集与存储需求。The measurement and control system of particles heat transfer experiment was designed for the particles heat exchange platform.Based on the EPICS(Experimental Physics and Industrial Control System)architecture design,this system integrates NI hardware platform,infrared thermal imager equipment and Oracle database to realize the online collection,monitoring,control and real-time storage of particles heat exchange platform.The infrared thermal imager was applied to measure the temperature of particles at the outlet of heat exchanger in the measurement and control system for its advantages in high sensitivity,wide range of temperature measurement and non-contact measurement.In this paper,the SDK(Secondary Development Kit)was employed to integrate infrared thermal imager into the EPICS system.Infrared images and the data were obtained to present the real-time temperature distribution of the particles more intuitively.By comparing the data with the measured results of the thermocouple,the feasibility of using the infrared camera as a real-time temperature measuring device for particles was further tested.The experimental results show that the integrated infrared camera operating software can obtain and store the temperature values of the infrared image in real time.And the measurement and control system of particles heat transfer experiment designed and developed by EPICS architecture can fully meet the data acquisition and storage requirements of the particles heat exchange platform.
关 键 词:颗粒传热 EPICS 红外热像 数据库 测控系统
分 类 号:TP274[自动化与计算机技术—检测技术与自动化装置]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.229