RGO/ABS/EPDM复合材料的制备及性能研究  

Preparation and property of RGO/ABS/EPDM composite

作　　者：罗祖云[1,2] 李媛媛 洪若瑜 Luo Zuyun;Li Yuanyuan;Hong Ruoyu(Zhicheng College,Fuzhou University,Fuzhou 350002;College of Chemical Engineering,Fuzhou University,Fuzhou 350116)

机构地区：[1]福州大学至诚学院,福州350002 [2]福州大学石油化工学院,福州350116

出　　处：《化工新型材料》2019年第11期72-76,共5页New Chemical Materials

基　　金：科技部创新基金(11C26223204581);福建省闽江学者奖励计划(闽人社批复[2016]149号);中央引导地方科技发展专项基金(83017078);福建省自然科学基金(2018J01431);福州大学贵重仪器设备开放测试基金资助项目(2018T023);福州大学至诚学院院级课程改革项目(ZJ1835);福建省中青年教师教育科研项目(JT180808)

摘　　要：采用改进的Hummer法合成氧化石墨烯(GO),将GO进行热还原得到还原氧化石墨烯(RGO),并通过直接熔融密炼法制备石墨烯/丙烯腈-丁二烯-苯乙烯/三元乙丙橡胶(RGO/ABS/EPDM)复合材料。采用扫描电子显微镜、X射线衍射仪、傅里叶变换红外光谱仪、四探针法等分析手段对复合材料表面形貌、微观结构、导电性能和力学性能进行了表征。结果表明:RGO优先分散于丙烯腈-丁二烯-苯乙烯聚合物(ABS)中,且热还原得到的RGO有效地提高了复合材料的力学性能和导电性能;RGO添加量为2. 5%(wt,质量分数,下同)时,复合材料拉伸强度提高74. 8%,缺口冲击强度提高4. 6%;RGO添加量为1. 5%时,复合材料缺口冲击强度最大,提高19. 8%;随着RGO添加量的增加,复合材料电阻率逐渐下降,当RGO添加量达到2. 5%时,复合材料电阻率下降趋势变缓。The modified Hummer method was used to prepare the graphene oxide(GO),and the GO was thermal reduced to obtain the RGO(reduced graphene oxide),and then the RGO/ABS/EPDM composite materials were prepared by direct melting and smelting method by combining RGO with ABS and EPDM. The surface morphology,microstructure,conductivity and mechanical properties were characterized by scanning electron microscopy(SEM),X-ray diffraction(XRD),Fourier infrared(FT-IR) and four-probe method. The results showed that the RGO was preferentially dispersed in ABS,and the mechanical properties of composite materials(RGO added was 2. 5 wt%,the tensile strength increased by 74. 8 wt%,the impact strength increased by 4. 6 wt%) and electrical conductivity(with the increasing of the quality of RGO,the resistivity was decreased,when added amount of 2. 5%,the resistivity was declined slower than before) were improved effectively by additon the RGO.

关 键 词：氧化石墨烯 热还原 复合材料 

分 类 号：TB3[一般工业技术—材料科学与工程]