检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:张丽芳[1] 常赟 Zhang Lifang;Chang Yun(College of Civil Engineering,Nanjing University of Aeronautics and Astronautics,Nanjing 210016,China)
机构地区:[1]南京航空航天大学土木工程系
出 处:《华东交通大学学报》2019年第6期106-111,共6页Journal of East China Jiaotong University
基 金:江苏省自然科学基金资助项目(BK20150750)
摘 要:为了探究铰接空心板桥横向加固后的横向受力分配变化及其计算方法,引入横向受力分配比的概念,对某简支空心板加固前后的荷载试验数据与铰接板法及修正刚接板法的理论计算结果对比,发现通过横向受力分配比实测值与计算值对比可以清晰展示单板受力现象,但实测数据形成的趋势线很不平滑;因此,引入横向受力分配增长值作为参数进行分析。虽然桥面现浇层及横向钢板加固增强了横向刚度,但实测横向受力分配比与按铰接板法的计算值吻合更好,说明铰接板法理论可以满足此类桥梁加固前后的横向分布计算。In order to study the transverse distribution change of hollow core slab bridge after reinforcement by transversal steel plate, a simply supported hollow core slab bridge was employed as an example. The field load test data of the bridge before and after reinforcement were compared with the theoretical results by hinged-joint slab method and modified rigid-joint slab method. It is found that the phenomenon of ‘single plate load effect’can be clearly displayed by comparing the measured and calculated values of the transverse distribution ratios.As the trend line formed by the measured data was not smooth, the relative transverse distribution growth value was introduced in the paper. Although the cast-in-situ deck and transverse steel plate reinforcement enhanced the transverse stiffness, the measured transverse distribution ratios were in good agreement with the calculated values according to the hinge-jointed slab method. The results show that the theory of hinge-jointed slab method can meet the transverse distribution calculation before and after the strengthening of such bridges.
关 键 词:空心板桥 铰接 横向受力分配比 钢板加固 荷载试验 铰接板法
分 类 号:U444[建筑科学—桥梁与隧道工程]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:3.12.160.196