SY500铝电解槽流动场的数值模拟与测试研究  

Numerical Simulation and Test Study of Flow Field of SY500 Aluminum Electrolysis Cell

作　　者：陈端[1] 王旋[1] 刘伟[1] CHEN Duan;WANG Xuan;LIU Wei

机构地区：[1]沈阳铝镁设计研究院有限公司

出　　处：《有色冶金节能》2019年第5期24-28,共5页Energy Saving of Nonferrous Metallurgy

摘　　要：基于电解槽流动场的分析,利用ANSYS软件模拟计算了SY500铝电解槽的流动场形态分布及界面变形,同时对某铝厂500 k A电解槽进行流动场测试,并将铝液流动方向和流动速度的模拟计算结果与实测结果进行对比分析,对比结果存在一定的偏差,但整体是相互吻合的,即基于数值模拟的电解槽流动场方法是准确可靠的。Based on the analysis of flow field of electrolysis cell,the flow field distribution and interface deformation of the SY500 aluminum electrolysis cell were simulated by ANSYS,and the flow field test of electrolysis cell with 500 kA in an aluminum plant was carried out,and the simulation calculation results of flow direction and velocity of the aluminum liquid were compared with the measured results. There was error in comparison results,but the whole was consistent with each other,in another word,the method of electrolysis cell flow field based on numerical simulation was accurate and reliable.

关 键 词：铝电解槽 流动场 数值模拟 铝液流动方向 铝液流速 

分 类 号：TF821[冶金工程—有色金属冶金]