大容量冷柜推拉门边条一模两腔注塑模设计  

Design of Injection Mold with one Mold and two Cavity for Sliding Door of Large Capacity Freezer

作　　者：周慧琳 丁鹏 于汇泳 ZHOU Hui-lin(College of Materials Science and Engineering,Henan Institute of Technology,Xinxiang 453003,China)

机构地区：[1]河南工学院材料科学与工程学院 [2]新乡学院机电工程学院,河南新乡453003

出　　处：《河南机电高等专科学校学报》2019年第5期12-13,64,共3页Journal of Henan Mechanical and Electrical Engineering College

基　　金：河南省高等学校重点科研项目（16B460004）;河南省高等学校青年骨干教师培养计划项目（2016GGJS-196）

摘　　要：针对大容量冷柜推拉门边条塑料件的结构特点及其装配使用要点,详细分析了其注塑成型工艺,并确定了注塑模设计方案。通过生产验证,能够满足生产需求。该注塑模的设计对同类产品的模具设计有一定的参考价值。According to the structural characteristics of the plastic parts of push-pull doors and the key points of assembling and using,the injection moulding process was analyzed in detail,and the design scheme of injection mould was determined.Through the production verification,it can meet the production demand and has a certain reference value for the die design of similar products.

关 键 词：一模两腔 浇注系统 侧向分型 

分 类 号：TG76[金属学及工艺—刀具与模具]