智能电能表过载运行时计量性能异常分析和改进策略  

Analysis and improvement strategy for abnormal metrological performance of smart meters in overload condition

作　　者：王晓东 段晓萌 赵宇东 王爽 赵婷 Wang Xiaodong;Duan Xiaomeng;Zhao Yudong;Wang Shuang;Zhao Ting(China Electric Power Research Institute Co.,Ltd.,Beijing 100192,China;State Grid Liaoning Electric Power Company Limited,Shenyang 110006,China)

机构地区：[1]中国电力科学研究院有限公司,北京100192 [2]国网辽宁省电力有限公司,沈阳110006

出　　处：《电测与仪表》2019年第24期133-137,144,共6页Electrical Measurement & Instrumentation

基　　金：国家电网公司总部科技项目《人工智能技术在用电信息采集系统中的应用研究》(JL71-18-022)

摘　　要：智能电能表在实际运行过程中,有时会碰到电流过载(大于Imax)运行的情况,某些电能表在过载运行中会出现功率减小甚至反向的情况,并且当电流恢复到计量量程以内,电能表仍然处于异常状态。文章从智能电能表现场运行故障案例出发,仿真计量芯片中的ADC模型和滤波器的溢出效应,对上述两个现象从原理上进行解释,并给出解决方案,同时通过试验数据验证解决方案的正确性。针对过载后的电能表性能要求,给各省电力公司提出了相应的指导意见。Current overload may happen during the actual operation of the smart meters.Once this happened,some meters may calculate a reduced power or even a reversed power,and when the current returns to the normal metering range,the meters may still behave abnormally.In this paper,based on the field operation failure case of smart meters,this paper simulates the overflow effect of ADC model and filter in the measurement chip,explains the above two phenomena in principle,and gives the solution,and verifies the correctness of the solution through experimental data.Corresponding guidance is put forward to the provincial electric power company according to the performance requirements of electricity meter under the overload conditions.

关 键 词：智能电能表 电流过载 溢出 

分 类 号：TM933[电气工程—电力电子与电力传动]