一种适用于LTE基站的宽频带双极化印刷偶极子天线  

A Broadband Dual-Polarization Printed Dipole Antenna for LTE Base-Station Applications

作　　者：罗秋强 陈昌明[1] 夏佳明 邹浩 LUO Qiu-qiang;CHEN Chang-ming;XIA Jia-ming;ZOU Hao(College of Communication Engineering,Chengdu University o f Information Technology y Chengdu 610225,China)

机构地区：[1]成都信息工程大学通信工程学院

出　　处：《微波学报》2019年第6期31-35,共5页Journal of Microwaves

摘　　要：提出了一种适用于LTE移动通信基站系统的低成本双极化偶极子基站天线辐射单元,天线采用0.8 mm板厚的FR4基板双层印制工艺。利用微带线垂直和折叠结构的辐射臂设计,有效地扩展了天线工作带宽,减小了天线物理尺寸。将两个偶极子单元垂直交叉构成±45°双极化天线。测试结果显示天线电压驻波比VSWR小于1.5的相对阻抗带宽为52.9%(1.705~2.93 GHz),隔离度大于19 dB,天线平均增益为8.67 dBi,半功率波束宽度为67°±8°。测试与仿真吻合较好,可应用于移动通信基站。A low-cost dual-polarization dipole antenna has been presented for LTE mobile communication base station applications in this paper. The proposed antenna was fabricated on a thickness of 0.8 mm FR4 substrate using standard PCB process. Using the vertical and folded microstrip lines to construct the radiation arm, the operating bandwidth of the antenna can be effectively expanded, and the compact physical size can be obtained. Then, two perpendicularly crossed dipoles are used to form an antenna with ±45° dual polarization characteristics. The experimental results demonstrate the bandwidth(VSWR<1.5) of the fabricated antenna element are 52.9%(1.705-2.93 GHz) with an isolation greater than 19 dB, and the average gain and half-power beam width are 8.67 dBi and 67°±8° respectively. The measured data shows good agreement with the simulations. It can be a candidate for mobile communication base station applications.

关 键 词：双极化 印刷偶极子 基站天线 宽频带 

分 类 号：TN929.5[电子电信—通信与信息系统] TN821.1[电子电信—信息与通信工程]