RSE-M规范与ASME规范Ⅺ卷在役无损检测方法对比分析  

Comparative Analysis of Nondestructive Test Methods for In-service Inspection as Specified in Specifications RSE-M and ASME BPV-Ⅺ

作　　者：李田[1] 严海[1] 尹芹[1] LI Tian;YAN Hai;YIN Qin(Suzhou Nuclear Power Research Institute,Suzhou215004,China)

机构地区：[1]苏州热工研究院有限公司

出　　处：《钢管》2019年第6期70-73,共4页Steel Pipe

摘　　要：比较RSE-M规范和ASME规范Ⅺ卷对在役检查检测方法的规定,分析两个规范中相关规定的相同点和不同点。分析认为:RSE-M规范和ASME规范Ⅺ卷均采用了七大常规无损检测方法;RSE-M规范对于特定的检验对象规定了具体检验方法,ASME规范对于检验方法的规定一般按类;RSE-M规范中声发射方法用于缺陷扩展和水压试验时的泄漏检测,ASME规范中声发射主要用于缺陷扩展的监测;RSE-M规范中涡流检测方法作为体积检验方法,ASME中涡流检测根据具体检验情形视为表面检查或体积检测;ASME规范对于检验方法的替代规定较为宽松。With a comparison between the regulations for nondestructive test methods for in-service inspection under RSE-M and those under ASME BPV-Ⅺ,the similarities and differences between the two are analyzed in detail.It is iden-tified via the analysis that the said two specifications both adopt the seven common-used major nondestructive test methods.RSE-M specifies detailed inspection methods as for specific inspection objects,while ASME specifies the inspection methods as per inspection categories.And the acoustic emission method under RSE-M is used for leakage monitoring during defect extension and hydrostatic testing,while the same method under ASME is mainly used for monitoring defect extension.Under RSE-M,the eddy monitoring method is used as a volume inspection method,while under ASME,the same inspection method is used for the purpose of surface inspection or volume monitoring just as per the specific inspec-tion status.Furthermore ASME describes rather generous regulations for substitution of the inspection method.

关 键 词：RSE-M ASME规范Ⅺ卷 无损检测 分析 

分 类 号：TG115.28[金属学及工艺—物理冶金]