FECR超导离子源磁体六极模拟线圈的Mirror结构设计及测试  

Mechanical Design and Testing of the Magnet Mirror Structure for Dummy Coil of a Superconducting FECR Ion Source

作　　者：朱丽[1,2] 吴巍[2] 俞树荣[1] 杜卓越[2] 陈玉泉 梅恩铭[2] 孙良亭 Zhu Li;Wu Wei;Yu Shurong;Du Zhuoyue;Chen Yuquan;Mei Enming;Sun Liangting(Lanzhou University of Technology,Lanzhou 730050,China;Institute of Modern Physics,Chinese Academy of Sciences,Lanzhou 730000,China)

机构地区：[1]兰州理工大学,甘肃兰州730050 [2]中国科学院近代物理研究所,甘肃兰州730000

出　　处：《稀有金属材料与工程》2019年第12期4035-4038,共4页Rare Metal Materials and Engineering

基　　金：国家自然科学基金国家重大科研仪器设备研制项目（11427904）;国家自然科学基金面上项目（11575266）

摘　　要：为了测试单体六极线圈经过绕制、热处理、环氧浸渍等一系列工艺过程后,电磁性能是否达到设计指标,设计了能够一定程度上模拟六极磁场及其应力分布的Mirror测试结构。由于Mirror结构在室温装配过程中采用Bladder-Key技术对六极线圈施加预应力,为了能够模拟从室温装配到冷却降温的操作流程、验证ANSYS有限元仿真方法与实验结果的一致性,依据六极线圈外形尺寸加工了一个模拟线圈。实验结果表明,铝壳和模拟线圈中心处的应变与ANSYS仿真计算结果基本一致,最大误差均在10%以内,验证了结构设计的合理性和仿真结果的可信性。To test the performance of the individual sextupole coil after the process of winding, heat treatment and vacuum-impregnation, a Mirror structure based on a Bladder and Key technology during the magnet assembly was devised. In order to simulate the assembly procedure from bladder and key pre-stress at room temperature through cool-down and verity the proposed method with ANSYS, a dummy coil according to the size of the sextupole Nb3Sn coil was got. Test results of the strain in the middle of shell and dummy coil exhibit a very good agreement with expected results calculated with the structural analysis program ANSYS, and the maximum error is less than 10%. The result verifies the rationality of the Mirror structure design and the credibility of simulation results.

关 键 词：Mirror结构 模拟线圈 NB3SN ANSYS 应变 

分 类 号：TM27[一般工业技术—材料科学与工程]