检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:孙涛 杨渝南[1] 高素芳 刘杰[1,2] 谢晓康 韩绍康 SUN Tao;YANG Yunan;GAO Sufang;LIU Jie;XIE Xiaokang;HAN Shaokang(Faculty of Civil Engineering and Architecture,China Three Gorges University,Yichang 443002,China;Key Laboratory of Geological Hazards on Three Gorges Reservoir Area,Ministry of Education,China Three Gorges University,Yichang 443002,China)
机构地区:[1]三峡大学土木与建筑学院,湖北宜昌443002 [2]三峡大学三峡库区地质灾害教育部重点实验室,湖北宜昌443002
出 处:《水资源与水工程学报》2019年第5期221-229,共9页Journal of Water Resources and Water Engineering
基 金:国家自然科学基金项目(51439003、51579138);国家自然科学基金杰出青年人才计划项目(2018CFA065);三峡大学硕士学位论文培优基金项目(2019SSPY035)
摘 要:以四川大渡河丹巴水电站引水隧洞为研究对象,结合三轴试验和自主研发的空间多角度片理抗拉强度测试技术,对不同片理夹角下石英云母片岩的力学参数进行测定,得出石英云母片岩的弹性模量、c和φ与围压之间的关系,并分别给出干燥和饱和条件下各力学参数围压敏感性排序。通过表征各向异性的参数k1、k2,对不同片理夹角下石英云母片岩的各向异性与围压的关系进行评价,并进一步指出不同高度岩样抗拉强度随片理角度的变化规律。采用横观各向同性本构模型,通过设定材料主轴空间方位,可模拟片理空间任意角度展布的岩体。针对大区域模型存在的不足,提出一种主应力构造精细应力场的新方法,避免了大模型的应力边界效应,可方便快捷对局部区域进行精细应力构造。根据片理走向及不同倾角选定15个不同片理空间展布模型进行计算分析,分别得出应力、位移、塑性区随片理角度的变化规律,并指出不同片理展布条件下的最不利工况。Taking the diversion tunnel of Danba Hydropower Station of Dadu River in Sichuan Province as the research object,we developed the space multi-angle tensile strength test technology and combined with the triaxial test.The mechanical parameters of quartz mica schist under different angles were measured.The relationships between elastic modulus,c,φand confining pressure of quartz mica schist were obtained,and the order of confining pressure sensitivity rankings of the mechanical parameters under dry and saturated conditions were calculated.By analyzing the anisotropic parameters k1、k2,the relationship between the anisotropy of quartz mica schist and the confining pressure under different angles was evaluated,and the change law of the tensile strength of different heights along with the angle of schistosity was further obtained.Using a transversely isotropic constitutive model and setting the spatial orientation of the material’s principal axis,it is possible to simulate the rock mass distributed at any angle in the schistosity space.In view of the deficiencies of the large-area model,this paper proposes a new method for constructing the fine stress field with principal stress,avoiding the stress boundary effect of the large model,and making it possible to perform fine stress construction on the local area quickly and easily.According to the trend of the schistosity and different dip angles,fifteen different schistosity spatial distribution models were selected for calculation and analysis.The changes of the stress,displacement,and plasticity regions with the angles of the schistosity were respectively given,and the worst working conditions under different schistosity distribution were pointed out.
关 键 词:石英云母片岩 横观各向同性模型 物理力学参数 应力场 隧洞围岩稳定性 片岩隧洞
分 类 号:TV732.3[水利工程—水利水电工程] U451.2[建筑科学—桥梁与隧道工程]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:3.135.184.134